LouisianaWhat state you in?
I have an E-Trac, Sun Ray Super Charger SR-12 and a Sun Ray X-1 pinpointer that I recently removed from by closet after several years of not using it. I found my Slimpack and battery pack holder missing. I received a new Slimpack (1800 mAh) and found that the diameter of the pin connection on my SR-12 did not fit the pin hole on the SlimPack. I guess the pin connection decreased in size from the original 1600mAh Slimpack. How or where can I get some type of pin adapter to make the connection?Louisiana
It looks like your wall charger is rated at 15v output. It is not compatible to my 9.6 volt battery pack. Thanks for the reply.Sent you a message. Maybe you can't receive them yet. Both an Etrac wall charger, and a car charger for $20 shipped...View attachment 584387
I have always used that same wall charger to charge my 9.6v 1600mah SlimPacks and done so for years. My charger does show a 15V output. I always figured the regulator managed it all. Jm2cIt looks like your wall charger is rated at 15v output. It is not compatible to my 9.6 volt battery pack. Thanks for the reply.
"and found that the diameter of the pin connection on my SR-12 did not fit the pin hole on the SlimPack"I have an E-Trac, Sun Ray Super Charger SR-12 and a Sun Ray X-1 pinpointer that I recently removed from by closet after several years of not using it. I found my Slimpack and battery pack holder missing. I received a new Slimpack (1800 mAh) and found that the diameter of the pin connection on my SR-12 did not fit the pin hole on the SlimPack. I guess the pin connection decreased in size from the original 1600mAh Slimpack. How or where can I get some type of pin adapter to make the connection?
I own a computer generated battery holder, made way back before the war, in Ukraine using just three 18650 3000Mah batteries, in my Etrac. Holder cost under $30. Batteries made a total cost of under $50. Prices on these old Etrac/Minelab battery packs is crazy IMPO. Damn, nearly a hundred dollars. I never drained that pack. Too many new ML machines since then, but I could easily hunt with my Etrac and Explorers with that pack, right now.My original E-Trac battery & charger are just like TexHunter's. 15v 100mA
I now have the RNB ML-3100 Li-Ion battery.
Ok TexHunter, I’m ready to buy it. What do we do next?Sent you a message. Maybe you can't receive them yet. Both an Etrac wall charger, and a car charger for $20 shipped...View attachment 584387
It's an Etrac charger from Minelab... PayPal or USPS Money Order, or personal check will work. Let me know how you want to pay... Email me at: texhunter at 70falcon dot com...It looks like your wall charger is rated at 15v output. It is not compatible to my 9.6 volt battery pack. Thanks for the reply.
I can send you a USPS Money Order but how do I get your name and mailing address?It's an Etrac charger from Minelab... PayPal or USPS Money Order, or personal check will work. Let me know how you want to pay... Email me at: texhunter at 70falcon dot com...
By sending me an email to the email address I posted above. I'm not going to list my name and address on an open forum. I'm not constantly monitoring this forum.I can send you a USPS Money Order but how do I get your name and mailing address?