You won't hear anything from 13 down which will include nickels. You'll still be able to see the VDI of numbers 13 and down. Gold hides in 13 and down too.
You won't hear anything from 13 down which will include nickels. You'll still be able to see the VDI of numbers 13 and down. Gold hides in 13 and down too.
Thanks to the both of you for your Insight. I primarily hunt Fields were old structures and towns used to exist. I can lower it below 13 but the reason why I asked the question is my brain goes bonkers hearing all the sounds of little tiny pieces of brass and lead. I run my iron discrimination at 0 to 1 just making sure that the iron is not masking anyting. Thanks again
Thanks to the both of you for your Insight. I primarily hunt Fields were old structures and towns used to exist. I can lower it below 13 but the reason why I asked the question is my brain goes bonkers hearing all the sounds of little tiny pieces of brass and lead. I run my iron discrimination at 0 to 1 just making sure that the iron is not masking anyting. Thanks again
Some masking will happen if you start raising disc.
One of the advantages of the 800 model is you can run any part ofnthe nonferrous range at zero volume tone wise.
So say I want to dodge a lot of the smaller foil, etc, I would zero out tonally region 1-4.
I wouldn’t want to get too close to say number 7. Allowing a little space let’s the equinox breathe a bit. Some good gold rings, buttons could be found lurking in this area.