600

I heard about her in the Fall of 2017 and was dying to meet her. So, in the Spring of 2018 I had saved up enough money to be able to meet her personally. When she arrived she was so good looking and even kind of sexy. Now prior to meeting Miss Equi, I had flirted with Miss Fisher, Miss Garrett...

This is for newbies to the hobby considering the purchase of the Equinox 600 or 800 metal detector and newbies who have purchased the 600 or 800. I have read three good books on the Equinox. Clive Clynick's 3 books on the Equinox and Andy Sasbisch's single book on the Equinox. Clive Clynick’s...

There are a lot of posts on various metal detecting forums asking Equinox 600 or 800 user what settings they use. In my opinion this is not the way to go about deciding what settings you should use for your Equinox. Why? Other people’s settings are for their specific type of soil and the types...

This advice is from many years of metal detecting and switching to the Nox 800 after using the famous Garrett AT Pro for 3 years. First off let me say the AT Pro was probably the most widely used mid price range detector ever built and for many good reasons. The Nox 800 is a completely...

I have made this statement before and I will make it again. Since March 2018 I have learned more about metal detecting in general with the Equinox 800 than all my detecting of and on since 1988. And more importantly I am still learning. The Nox forces you to learn more if you want to use the...

Here is an update to my review of Clive Clynick’s The Minelab Equinox: “An Advanced Guide”. I think this book goes deeper into the 600 and certainly the 800 than his first Equinox book. This is because the 800 has some more useful options over the 600. The other reason Clive has more time on...

just received the book today. will read it over the holidays and report back. Will compare to his first book "From Beginner to Advanced" to see how much of an overlap there is between the books.

I read that a the 15" coil for the equinox is coming. Anyone got any ideas on what to expect? When I got my NEL Thunder it really didn't do that much for my AT Pro. It was real sensitive to being bumped by any small scrub brush. But to be fair to NEL I didn't hunt many open fields so it...

I though I had this info, but cannot locate it. does anyone know the TID reading on Equinox for a civil war buckle? thanks

I came from three years of hunting with the AT Pro and many hours on other mid-ranged price detectors. I now have about 30 hours on the Equinox 800 and on any given day after a hunt I am about ready to sell the 800 and buy another AT Pro. But I find myself out there 2-3 days later hunting with...

Here is my air test on the Equinox 800 comparing the 11 inch stock coil to the 6” coil. Did a factory reset and set sensitivity to 21, recovery speed to 6. Iron bias of 6. Setup and methods: I set the coils on an all plastic child’s picnic table to eliminate any metal. Swept the table to...

I have mentioned this 111 page book titled "The Minelab Equinox Series - From Beginner to Advanced" in some replies to other Equinox related posts. Here I will give you my take on the book. First about me. I have used the great AT Pro for about three years and have been metal detecting since...

This is the Ultimate Minelab Equinox 600/800 VDI Numbers and Tones video covering Rings and other Jewelry. I cover Platinum, Gold, Silver, Tungsten, Stainless Steel, and Aluminum Rings. Pendants, Earrings, and even go over various different style Pull Tabs. A lot of time was put into this...

I just completed a very nice Test/Demonstration video on the Minelab Equinox 600 / 800 covering Coins, both Silver and clad. I did a lot of editing to make this video stand out from the average target test. Make sure to check out my other video covering Rings and Jewelry! Hope these videos...

With the purchase of my new Minelab Equinox 600 (waiting for my 800 on backorder) I set out to find some needed but harder to find accessories...Headphones for the Water was my priority this time! In this YouTube video I cover a gentleman (Tony) who is the!Only United States based modifier!and...

With the purchase of my new Minelab Equinox 600 (waiting for my 800 on backorder) I set out to find some needed but harder to find accessories. I made this YouTube video of the Deanos cover, which as far as I can tell is the Only United States based manufacturer and seller of!protective covers...