Friendly Metal Detecting Forums   River Team 6 Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Make It or Fix It Yourself

Reply
  
Thread Tools Display Modes
  #1  
Old 01-13-2021, 03:29 PM
John Madill John Madill is offline
Full Member
 
Join Date: Oct 2020
Posts: 104
Default Winter day project

My first detector, bought in the fall, was a BH Discovery 3300 and i had a nice soft case on hand that was made for photographic light stands that worked great for transport.

Bitten badly by the bug i soon had a Minelab Vanquish 540 and it would not fit in that bag.

So i started looking for a hard case that could hold the detector and accessories and found this plastic trunk at Menards.

The Vanquish is a snug fit but you have to reverse the arm rest to make it fit but that only takes a few seconds. The Vanquish is also much easier to collapse than the Discovery 3300.

The case easily holds both detectors, a big and little digger, find bag, and lots more stuff. I also put a closed cell foam pad on the interior bottom for protection

I used velcro straps to hold some items on a board attached to the top of the trunk. A problem with that however is you cannot let the trunk top swing all the way back because it stresses the plastic hinges.

But when i have this in the back of my SUV the back will rest vertically against the sidewall of the car so it shouldn't be a problem.

Couple other nice touches to the trunk are it has wheels on one end and is made in the USA.
Attached Images
 
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 04:31 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.