Friendly Metal Detecting Forums   Kellyco Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Make It or Fix It Yourself

 
  
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-30-2018, 03:32 PM
seas1to2 seas1to2 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 475
Default fixing a whites pi pro

my machine has been down for 2 plus years now. its been sent to whites at least 6 times and still doesn't work, I gave up on them. they replace everything,new pc board ( 2 times) 3 different coils and it will only pick up a coin if you put it within 1 inch of the coil. well yesterday I took it backout and started playing with it and took the circuit board out, there are 3 variable resistors, 1 on the back side is for volume, but 2 on the otherside not sure what they do butI think 1 is offset and other is delay, just need to know which 1 is what . they are the blue adjustable device. ....1 is near the edge the othermore near the center...... moving these I have increased my coin signal to 11 inch so far. thanks for any help
Attached Images
 

__________________
minelab sovereign elite, surfmaster pi pro

Reply With Quote


 


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 01:02 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.