SuchMuch
Full Member
AKA succeed working out VLF detector working 2 frequency at once. This detector sees no differance if ground is heavely mineralized or it's a non salty sand or even air, it's not being influanced by mineralisation at all. It's deep as Signum MFT but with right identification at any depth. It's provides right stable identification of small coin inserted into ferrite penal (coin is covered by ferrite in every direction)
Here some pics:
As reported it provides right identification even in cases when Signum MFT fails: rusted flat iron at depth, rusted axes, small thin flat iron pieces.
There are few detectorists who saw STF machine, I've translated some info came from them:
***qte***
Mr. Lvovich is working hard to finish SFT machine and it seems he has find a solution how to succeed. He exposed some new implementations done to STF which, i think, make STF ready for mass release. However there is a lot to confirm in real hunt conditions. The same "ground" tasks aren't complete for Berkut-7 as well.
AKA is planning to implement 1 unified hodograph obtained from 2 hodographs (SFT works on 2 frequinces at once) and AKA detectorist will have no necessity to analyze info coming from 2 frequencies in real time.
Piligrim project is set on hold owing to Russian ruble goes down and consequently this project becomes non actual nowadays. It's on the one hand, on the other hand single frequency projects (Piligrim, Intronik) are delayed owing to those new solutions being worked out within SFT project which are planned to be implemented into single frequency machines as well.
I was impressed what I've seen and, I think, AKA is 1 step behind to a finish! All innovations I have seen are worth all these years we've been waiting for new models to come. I hope first SDF machines will be produced for testers this summer, I've got some sites with terrible grounds to have this machine to be tested on
As I saw, SDF handles signals very quickly. SDF will use 1 frequency only at trashy sites, there will be an algorithm like a MM for contaminted soils. As to power consumption, it's expected to be excessive. As for me this issue isn't critical, I think external power source could be fitted on belt as it's realized in Minelab GPX series or batteries will be changed more often; results I saw are worth it.
SDF prototype detects a coin fully covered by ferrite penal and produce stable hodograph and detectorist doesn't need to play with settings guessing what is beneath. It's a first time I saw such magnificent achievements with SDF, all the previous achievements fade in comparison with these ones.
There are some features are being worked out to have flat thin rusted iron be separeted from coins. These features are to be added to existing AKA models (Signum, Sorex family, Berkut)
***unqte***
As expected STF will be used on any kind of ground even for gold prospecting on highly mineralized soils.
STF probably will cost usd 12000.
PS.
Due to price level Russian forumsproduce boiling water emit heated gases
Here some pics:
As reported it provides right identification even in cases when Signum MFT fails: rusted flat iron at depth, rusted axes, small thin flat iron pieces.
There are few detectorists who saw STF machine, I've translated some info came from them:
***qte***
Mr. Lvovich is working hard to finish SFT machine and it seems he has find a solution how to succeed. He exposed some new implementations done to STF which, i think, make STF ready for mass release. However there is a lot to confirm in real hunt conditions. The same "ground" tasks aren't complete for Berkut-7 as well.
AKA is planning to implement 1 unified hodograph obtained from 2 hodographs (SFT works on 2 frequinces at once) and AKA detectorist will have no necessity to analyze info coming from 2 frequencies in real time.
Piligrim project is set on hold owing to Russian ruble goes down and consequently this project becomes non actual nowadays. It's on the one hand, on the other hand single frequency projects (Piligrim, Intronik) are delayed owing to those new solutions being worked out within SFT project which are planned to be implemented into single frequency machines as well.
I was impressed what I've seen and, I think, AKA is 1 step behind to a finish! All innovations I have seen are worth all these years we've been waiting for new models to come. I hope first SDF machines will be produced for testers this summer, I've got some sites with terrible grounds to have this machine to be tested on
As I saw, SDF handles signals very quickly. SDF will use 1 frequency only at trashy sites, there will be an algorithm like a MM for contaminted soils. As to power consumption, it's expected to be excessive. As for me this issue isn't critical, I think external power source could be fitted on belt as it's realized in Minelab GPX series or batteries will be changed more often; results I saw are worth it.
SDF prototype detects a coin fully covered by ferrite penal and produce stable hodograph and detectorist doesn't need to play with settings guessing what is beneath. It's a first time I saw such magnificent achievements with SDF, all the previous achievements fade in comparison with these ones.
There are some features are being worked out to have flat thin rusted iron be separeted from coins. These features are to be added to existing AKA models (Signum, Sorex family, Berkut)
***unqte***
As expected STF will be used on any kind of ground even for gold prospecting on highly mineralized soils.
STF probably will cost usd 12000.
PS.
Due to price level Russian forums