Gauntlet
Forum Supporter
Had nothing in it but junk, and I was considering buying a second box I could take in and out, would have been a metal truck box, and could have secured it to the truck when needed.
Instead, I dropped a 3/4" plywood floor in this box, added a center divider, and ends, then firing strips between them, and built the upper trays which just nest on the top. I can lift the entire thing out, as nothing is fastened to the box, I just have to pop the shocks off the lid to allow it to open far enough to lift it out.
I keep a small throw rug on top of the coils and detectors, which prevents them from bouncing around.
Instead, I dropped a 3/4" plywood floor in this box, added a center divider, and ends, then firing strips between them, and built the upper trays which just nest on the top. I can lift the entire thing out, as nothing is fastened to the box, I just have to pop the shocks off the lid to allow it to open far enough to lift it out.
I keep a small throw rug on top of the coils and detectors, which prevents them from bouncing around.