archaeoyogi
New Member
- Joined
- Jan 16, 2017
- Messages
- 4
Hi there,
I am trying to ID a cartridge casing I found. It's highly oxidized (green) so it is likely a copper or brass casing. The headstamp is not visible, however it is clearly a center-fire casing.
The measurements are approx. 1.3in (33.3mm) casing length with a base diameter of 0.438in (11mm). The research I've done so far is pointing towards the best match being .44 caliber based on the measurement, however I am not positive of this.
Attached are photos.
Thank you for your assistance.
I am trying to ID a cartridge casing I found. It's highly oxidized (green) so it is likely a copper or brass casing. The headstamp is not visible, however it is clearly a center-fire casing.
The measurements are approx. 1.3in (33.3mm) casing length with a base diameter of 0.438in (11mm). The research I've done so far is pointing towards the best match being .44 caliber based on the measurement, however I am not positive of this.
Attached are photos.
Thank you for your assistance.