• Forum server maintanace Friday night.(around 7PM Centeral time)
    Website will be off line for a short while.

    You may need to log out, log back in after we're back online.

Repairing broken coils (mouse ears)

Chipk

Elite Member
Joined
Mar 18, 2013
Messages
3,314
Location
Jacksonville / Yulee Florida
Charly-In-Ct-Ri inFebruary posted a brilliant repair for broken mouse ears. A;l credit goes to him. I just tweaked his ideas.

No matter how careful I am kneeling and standing I somehow managed to break a half dozen expensive coils. I tried repairing them with nylon washers and even glueing them on before using them.

They still broke.

So I was enthusiastic in trying his repairs. But they centered around plastic electrical boxes that he cut and reshaped using PVC glue and primer. But I could never find the right size. They were always too large.

Well one day I was wandering through Home Depot and found myself on the PVC aisle and saw some joints and connectors that looked like they might work. So I bought several sizes and headed to my garage.

First I selected a coil and with my Drexel I started carefully slicing away the broken ears. Then I took my sander and smoothed it off. I then selected the right size cap and placed it on the coil and it looked like there was adequate surface area to support it.

Next I measured where to drill the holes and after using 4 different sized drill bits I had the right holes. But after connecting everything I realized there was still too much play. So I began adding nylon washers until I had a good combination for a snug fit.

I wanted to be able to have a little vertical play with the shaft so I took the Drexel and cut a space in the cap at the back. A little use of the sander smoothed up the edges. Then I also sanded the bottom of the connector to rough up the surface so the PVC glues will hold better.

Then I painted it. Mostly to hide my poor craftmanship.

I first used PVC Primer and then PVC glue to attach the 2 pieces. Always add the adhesives on both pieces. I let it sit overnight.

The next morning I tried to break the bond but it seems strong.

It’s a bit of a challenge to hook up the bolt, coil and washers because it’s a tight fit but perseverance will make it happen. A foam sealant might help if there’s too much play but this seems to be what I need.

I took my Garrett ATPro with the patched 5x8 coil out yesterday and today. I was cautious at first but before long I forgot I was using a broken coil. No problems and I even found a few things.
 

Attachments

  • ED88AD6E-2792-47C4-AA03-2E873E5AC0C6.jpg
    ED88AD6E-2792-47C4-AA03-2E873E5AC0C6.jpg
    39.7 KB · Views: 817
  • AC4BD97B-3F96-4F18-93D4-E35DC04C3FEE.jpg
    AC4BD97B-3F96-4F18-93D4-E35DC04C3FEE.jpg
    48.7 KB · Views: 737
  • 24370514-9C28-4FA6-8E8C-17C776C2AAC5.jpg
    24370514-9C28-4FA6-8E8C-17C776C2AAC5.jpg
    60.4 KB · Views: 746
  • EF79F310-2FF7-4990-8DB0-EBA717AB9A89.jpg
    EF79F310-2FF7-4990-8DB0-EBA717AB9A89.jpg
    47.3 KB · Views: 737
  • 98989378-919E-4CF0-91FA-E074E2211D7D.jpg
    98989378-919E-4CF0-91FA-E074E2211D7D.jpg
    67.3 KB · Views: 737
  • C2330C93-2B90-4AB0-AF7F-63ABD26AAE7F.jpg
    C2330C93-2B90-4AB0-AF7F-63ABD26AAE7F.jpg
    67.6 KB · Views: 726
Nice job on the repair. Could you post a picture of the shaft connected to the new PVC piece?

Sent from my SM-T580 using Tapatalk
 
Hooked up and ready for action

Nice job on the repair. Could you post a picture of the shaft connected to the new PVC piece?

Sent from my SM-T580 using Tapatalk


Soitenly.
 

Attachments

  • 6675DEDE-978A-4ECF-BAC3-191083B1740C.jpg
    6675DEDE-978A-4ECF-BAC3-191083B1740C.jpg
    146.9 KB · Views: 739
  • C5F46165-1412-4636-A65E-1AD80D458B54.jpg
    C5F46165-1412-4636-A65E-1AD80D458B54.jpg
    104.6 KB · Views: 711
  • 6A327947-9008-4B0C-B3AB-F3847295901A.jpg
    6A327947-9008-4B0C-B3AB-F3847295901A.jpg
    116.9 KB · Views: 726
Great job. I bet it is stronger then the original ears. My repair was on a Dual Field (water hunting machine) and it is still holding up even with all of the water resistance.
 
Y
Charly-In-Ct-Ri inFebruary posted a brilliant repair for broken mouse ears. A;l credit goes to him. I just tweaked his ideas.

No matter how careful I am kneeling and standing I somehow managed to break a half dozen expensive coils. I tried repairing them with nylon washers and even glueing them on before using them.

They still broke.

So I was enthusiastic in trying his repairs. But they centered around plastic electrical boxes that he cut and reshaped using PVC glue and primer. But I could never find the right size. They were always too large.

Well one day I was wandering through Home Depot and found myself on the PVC aisle and saw some joints and connectors that looked like they might work. So I bought several sizes and headed to my garage.

First I selected a coil and with my Drexel I started carefully slicing away the broken ears. Then I took my sander and smoothed it off. I then selected the right size cap and placed it on the coil and it looked like there was adequate surface area to support it.

Next I measured where to drill the holes and after using 4 different sized drill bits I had the right holes. But after connecting everything I realized there was still too much play. So I began adding nylon washers until I had a good combination for a snug fit.

I wanted to be able to have a little vertical play with the shaft so I took the Drexel and cut a space in the cap at the back. A little use of the sander smoothed up the edges. Then I also sanded the bottom of the connector to rough up the surface so the PVC glues will hold better.

Then I painted it. Mostly to hide my poor craftmanship.

I first used PVC Primer and then PVC glue to attach the 2 pieces. Always add the adhesives on both pieces. I let it sit overnight.

The next morning I tried to break the bond but it seems strong.

It’s a bit of a challenge to hook up the bolt, coil and washers because it’s a tight fit but perseverance will make it happen. A foam sealant might help if there’s too much play but this seems to be what I need.

I took my Garrett ATPro with the patched 5x8 coil out yesterday and today. I was cautious at first but before long I forgot I was using a broken coil. No problems and I even found a few things.
Curious to know how your repair is holding up? I just had the left coil ear on my nox 15 in coil break and thinking of trying your method . Thanks Mike
 
Y
Curious to know how your repair is holding up? I just had the left coil ear on my nox 15 in coil break and thinking of trying your method . Thanks Mike

I made a post on make it and fix. On the Equinox ear stiffener and repair. This downloadable 3D printer program has a repair kit to fix the issue.
 
Y
Curious to know how your repair is holding up? I just had the left coil ear on my nox 15 in coil break and thinking of trying your method . Thanks Mike

My repair is still holding up. I don't use the PI that often but I had it in the water for an hour just the other day. You can see my repair on the this forum.
 
I got the idea on how to repair the ears on my 2500 coil from a thread here on the form. I used PVC parts and glue. It seems to be stronger than it was before.
Coil 3.jpg
Coil 1.JPG
The first picture is before i trimmed it down to fit better.
 
If you want to repair delicate or strong plastic I recommend Q bond. It has a powder to sprinkle on the glue and it's incredible! Dries fast! Strong too!
We use it on car plastic parts!
 
Back
Top Bottom