Friendly Metal Detecting Forums   Deteknix
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Make It or Fix It Yourself

Reply
  
Thread Tools Display Modes
  #1  
Old 08-12-2017, 10:38 AM
Gauntlet's Avatar
Gauntlet Gauntlet is offline
Elite Member
 
Join Date: Oct 2011
Location: South of Graceland
Posts: 1,395
Default Straight shafted my Vaquero

Been wanting to see how using a straight shaft detector felt, being as I'm a bit taller, and sometimes actually kick the coil..... plus I was bored this AM.

I had been considering trying this, especially every time I ran across a couple extra extendable aluminum paint poles out in the shed, or seen someone make mention of it here.





I used the inner piece, since it was a pretty close fit to the lower shaft fitting into it. I drilled for both lock buttons (instead of the one on the factory shaft), and drilled both sides of the shaft, so 4 buttons instead of 2. I did that because there's no twist lock on it, and this virtually eliminated 95% of any play. I did add a couple wraps of black tape on the lower shaft, just inside the new straight shaft to eliminate the rest of any play.

I still need to clean-up the holes to allow the other button to pop the rest of the way out.



I was going to go buy a clamp-on handle, but since I wasn't sure I would even like this set-up, I opted to use what I had. I cut another piece from the left-over of the shaft, and slipped a tight fitting piece of wooden dowel inside, then drilled and countersunk a couple stainless screws into the side of it so the aluminum would stay in place in relationship to the dowel. Then I just put a 2" stainless screw through the bottom of the straight shaft, up into the center of the wooden dowel. This was after filing the bottom of the handle to fit the radius of the shaft.



I also let the lower shaft slip up into the new straight shaft more than "normal" as an additional way to eliminate play. I'm not concerned about any adjustment, because I fit it to suit me, so it won't need changed.



I forgot to put the black plastic plug back into the end, and I flipped the arm cuff over since my arm doesn't fit into it as is, and come colder weather, my arm (jacket) would just be resting on the top edges of the cuff.

__________________
Tesoro: Vaquero, DeLeon, 2-Cibola (1 with GB mod), and Compadre (with coil swap mod).
Fisher: 1265X

Reply With Quote


  #2  
Old 08-12-2017, 11:07 AM
Ice Scratcher's Avatar
Ice Scratcher Ice Scratcher is online now
Elite Member
 
Join Date: Oct 2012
Posts: 16,455
Default

Turned out awesome!

Can't believe how compact some of those control boxes can be..

If you ever want to water hunt, check out Ground Sweeper's waterproof compadre..

<)))>{
Reply With Quote


  #3  
Old 08-12-2017, 11:53 AM
Jak's Avatar
Jak Jak is offline
Supporter
 
Join Date: Dec 2016
Location: Montgomery County, PA
Posts: 882
Default

That looks like a professional job! You may have a new full time job....

__________________
Nothing fancy here...Tesero Tejon, Whites's TRX pinpointer, Ultimate Gray Ghost headphones, Lesche digger

Reply With Quote


  #4  
Old 08-12-2017, 04:57 PM
Gauntlet's Avatar
Gauntlet Gauntlet is offline
Elite Member
 
Join Date: Oct 2011
Location: South of Graceland
Posts: 1,395
Default

Originally Posted by Jak View post
That looks like a professional job! You may have a new full time job....
Thanks! Had a job once, didn't care for it

Originally Posted by Ice Scratcher View post
Turned out awesome!

Can't believe how compact some of those control boxes can be..

If you ever want to water hunt, check out Ground Sweeper's waterproof compadre..

<)))>{
Thanks! That's one of the things I love about Tesoros, lightweight. I never was much of a water hunter, but I did see somewhere where a guy took the guts out of a Compadre and mounted them in a set of headphones. Id be in on that if I could find a set of cups large enough.

__________________
Tesoro: Vaquero, DeLeon, 2-Cibola (1 with GB mod), and Compadre (with coil swap mod).
Fisher: 1265X

Reply With Quote


  #5  
Old 08-12-2017, 05:05 PM
Gauntlet's Avatar
Gauntlet Gauntlet is offline
Elite Member
 
Join Date: Oct 2011
Location: South of Graceland
Posts: 1,395
Default

I was still bored, so I did the GB modded Cibola. This time I mounted the control box up top. I still need to put a toggle on the back side of the handle for pinpoint, and get a couple caps for the tubing under the control box.

I did make this one where I could use the center piece of the Tesoro shaft, so it'll break-down smaller. If I like the straight shafts, I may go back and do the same to the Vaquero.









__________________
Tesoro: Vaquero, DeLeon, 2-Cibola (1 with GB mod), and Compadre (with coil swap mod).
Fisher: 1265X

Reply With Quote


  #6  
Old 08-13-2017, 12:12 PM
TabZilla's Avatar
TabZilla TabZilla is online now
Full Member
 
Join Date: Feb 2017
Location: Central Florida
Posts: 243
Default

Looks good Gauntlet!

If you are gentle with a heat gun you can heat the arm cuffs
and bend them out a bit to make more room.

__________________
Beep-beep-b-beep-beep--gold ring

Reply With Quote


  #7  
Old 08-13-2017, 02:12 PM
Gauntlet's Avatar
Gauntlet Gauntlet is offline
Elite Member
 
Join Date: Oct 2011
Location: South of Graceland
Posts: 1,395
Default

Thanks!

I did get the pinpoint button put back on, so she's ready to hunt again! I still plan to find a plug to replace the cap the button is is, as it would set the button down a little closer to the control box.

__________________
Tesoro: Vaquero, DeLeon, 2-Cibola (1 with GB mod), and Compadre (with coil swap mod).
Fisher: 1265X

Reply With Quote


  #8  
Old 08-14-2017, 10:43 AM
Curbdog's Avatar
Curbdog Curbdog is offline
Elite Member
 
Join Date: Dec 2010
Location: Middle TN
Posts: 2,828
Default

That's a pretty sweet idea!

I was wondering why the arm cuff was upside down. Now i know!

__________________
GM5, Deeptech Vista Smart

Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.