The video below is a video where auto sensivity Using Minelab Etrac is experimented with.
Enjoy the video.
I gave Etrac around 4 minutes when conflicted with EQiunox. Never went any higher than. 21 sens in the window sweeping.
https://m.youtube.com/watch?v=CiWav6oUevA
Some additional info.
Food for thought type info.
Could apply to all fbs and fb2 Detectors.
Scenario.
You and a bud are hunting a site. Both individuals are using fbs/fbs2 type detectors or one is even using an EQX or say another detector that can be switched frequency wise like Anfibio mulit, Deus, etc.
So could it be possible this auto sens, could it sens silent Emi??
Imagine if a Etrac user or CTX user goes to site and immediately goes to manual sensitivty. There is no for lack of a better term here tracking like auto sens provides.
Let’s say youngo to a site you’ve been to previously using fbs/fbs2 type detector and it indeed with auto sens went let’s say to 28 in the window.
But when you go with a bud and they are using their detector and you never go to auto sens to see how high your detector will track after doing noise cancel. You infact go straight to Manual sensivity.
What I am saying it might be a good idea in this situation to first go to auto sens with your noise cancel done and see how high it will go in auto sensitivty. If it goes high then choose manual,sensitivty if you desire.
And if your bud changes freqs, or does another noise cancel it would be nice if they let you know,,and if you do let them know.
How close in proximity folks are detecting obviously will drive the overall possible effects here.
Enjoy the video.
I gave Etrac around 4 minutes when conflicted with EQiunox. Never went any higher than. 21 sens in the window sweeping.
https://m.youtube.com/watch?v=CiWav6oUevA
Some additional info.
Food for thought type info.
Could apply to all fbs and fb2 Detectors.
Scenario.
You and a bud are hunting a site. Both individuals are using fbs/fbs2 type detectors or one is even using an EQX or say another detector that can be switched frequency wise like Anfibio mulit, Deus, etc.
So could it be possible this auto sens, could it sens silent Emi??
Imagine if a Etrac user or CTX user goes to site and immediately goes to manual sensitivty. There is no for lack of a better term here tracking like auto sens provides.
Let’s say youngo to a site you’ve been to previously using fbs/fbs2 type detector and it indeed with auto sens went let’s say to 28 in the window.
But when you go with a bud and they are using their detector and you never go to auto sens to see how high your detector will track after doing noise cancel. You infact go straight to Manual sensivity.
What I am saying it might be a good idea in this situation to first go to auto sens with your noise cancel done and see how high it will go in auto sensitivty. If it goes high then choose manual,sensitivty if you desire.
And if your bud changes freqs, or does another noise cancel it would be nice if they let you know,,and if you do let them know.
How close in proximity folks are detecting obviously will drive the overall possible effects here.
