Some pointers.
Learn to navigate menu.
Learn to access the advanced settings part of menu.
Do this at your house.
When you receive unit.
Charge all components.
You WILL need something to charge with- NO charger provided.
Park 1 default is a good place to start.
Get a few nails, steel bottle caps, coins, pull tabs and rings, don’t forget a nickel.
Sweep on top of ground.
And listen to the music played.
Place nails near coins and see what happens and see how unit sounds.
Learn how to ground balance detector.
Learn how to noise cancel detector.
Default setting in park 1 will get one rolling quick.
Also notice depth meter behavior when raising coil above coins. Especially dime and nickel sized coins.
Learn how to do full detector reset.
Remember if you make a setting change and forget or can’t figure out how to change back,,,just do a factory reset..then you have good initial starting point once again.
Pairing blue tooth (both models) or the wistream module on 800 not hard.
Check your backlight setting.
Don’t run if you don’t need.
Lots of threads here where folks share some good info.
You can do searches and find it. Or scroll backwards through history and find.
I recommend reading some of the users of EQx who have posted in the beach subforum and the relic and coin and jewelry subforms here. Good tidbits there to pick up on.
Anyone NEEDing help.
Post away.
No such thing as a dumb question.
Here is advanced search I did using EQuinox in the search window. All about detectors subforum.
https://metaldetectingforum.com/search.php?searchid=12063990
Unit is fun as all get out.
Cheers.