Friendly Metal Detecting Forums   River Team 6 Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Other Forums > Forum Help & Announcements

Notices

Reply
  
Thread Tools Display Modes
  #1  
Old 10-03-2020, 10:23 PM
goodtom goodtom is offline
New Member
 
Join Date: May 2017
Location: Prescott, AZ
Posts: 3
Default Gold in quartz

Hello to all!
I have a question for you experienced detectorists. It has to do with finding gold embedded in Quartz.
How deep will the average metal detector detect gold in Quartz? I have a special spot I go that contains a lot of Quartz. The size of the Quartz I find varies from 5-30 inches in diameter; sometimes larger. I've waved my detector over most of this Quartz. I've never received a sound that alerted me that gold may be within. I've never crushed this Quartz down to smaller sizes. I want to avoid doing so whenever possible.
I appreciate anything that will better educate me on this subject.
Thank you! Tom (goodtom)

Last edited by goodtom; 10-04-2020 at 12:26 AM. Reason: wanted title in capitals
Reply With Quote


  #2  
Old 10-04-2020, 01:31 AM
metaladdict's Avatar
metaladdict metaladdict is offline
Elite Member
 
Join Date: Mar 2010
Location: Santa Rosa,Ca
Posts: 13,548
Default

I think most detectors will detect gold if it's large enough,but not more than 9 inches to 12.
The Minelab Gpx will go deepest.
Opinions will vary.

__________________
Detectors. Garrett AT Pro, Ace 250.. Equinox 800. Stavr scoop!
Life member of Ring keepers! John 14:6. Luke15:8-10
Oldest U.S. coin 1899 Half dollar (see upper left)

Reply With Quote


  #3  
Old 10-08-2020, 10:40 PM
Skippy SH13's Avatar
Skippy SH13 Skippy SH13 is offline
Supporter
 
Join Date: May 2015
Location: Pacific NW
Posts: 3,607
Default

agreed. A decent mid-range detector should detect gold (especially if it's made for it... the frequency matters).

The smaller the gold, the closer you have to be, of course, but it'll pick it up.

The hard part will be the fact that it'll also pick up OTHER minerals, such as iron. Extremely small gold ("pickers" for example) will ring up very low on the conductivity range, and sound much like iron.

If you're in a heavy iron-pyrite area, it's going to be tough.

Cheers!

Skippy

__________________
Garrett AT Max with NEL Thunder Coil - Garrett Pro-Pointer AT - Lesche Digger. ~1000 rings in 4.5 years ~7% gold find rate. I'm a RING HUNTER, clad is incidental.
In 2020 as of 11/25/2020: Clad=$638.40; Rings=205; Keys=45; Silver=62; Gold=16; Flat Penny=15; Hunts=113

Reply With Quote


  #4  
Old 11-10-2020, 05:14 PM
yooper69's Avatar
yooper69 yooper69 is offline
Elite Member
 
Join Date: Dec 2017
Location: Michigan's U.P
Posts: 1,631
Default

Minelab GPX series will definitely tell you if gold is present. Living in Arizona i would definitely buy one. Got a buddy who has one out there and does really well with it.

__________________
EQ-800
2020 Silver Coins 75-FTY (1CD)
(24-Rosie) (22-Merc) (4-BD) (1-SD)(3-WLH) (9-GWQ) (5-BQ) (1 SLQ) (5-WN) (33-IHP)(1BFH)

Reply With Quote


  #5  
Old 11-18-2020, 01:05 PM
The Jersey Digger's Avatar
The Jersey Digger The Jersey Digger is offline
Elite Member
 
Join Date: Sep 2010
Location: Phoenix, AZ
Posts: 4,748
Default

I am in Phoenix and hunt in the Bradshaws often if you ever want to detect...

__________________
Equinox 800 9/5/10(2020) IH/FE 68(0)wheat 550(12)Silver 134(3)Buff/V/Shld 35(0)LC 74(0).925 31(1)2c 3(0)
1662 Cob;1835&38 1/2 dime;5 Reales;2 Cobs;1794 LC&HC;1853 Trime;1723 Woods Hib;1695 W&M;1724 KGII;

Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 08:06 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.