Friendly Metal Detecting Forums   Myers Depot Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Metal Detector Accessories

Reply
  
Thread Tools Display Modes
  #1  
Old 06-10-2021, 06:15 PM
Eightball3 Eightball3 is offline
New Member
 
Join Date: Jun 2021
Posts: 4
Default White's MXT300

Hello everyone,
I was hoping someone could tell me if there is a compatible coil for my detector or even if its worth it. I believe to coil is bad as it makes a lot of noise. Even hitting blades of grass causes it to go off. Thanks!
Reply With Quote


  #2  
Old 06-10-2021, 08:55 PM
Valley Hunter's Avatar
Valley Hunter Valley Hunter is offline
Senior Member
 
Join Date: Jun 2012
Location: Merced Ca.
Posts: 427
Default

Look for a Detech 8 x 6" SEF Search Coil

__________________

Minelab Equinox 600, Vanquish 540, Nokta Makro Simplex+, Garrett AT Max & Ace Apex
Reply With Quote


  #3  
Old 06-11-2021, 03:26 PM
Eightball3 Eightball3 is offline
New Member
 
Join Date: Jun 2021
Posts: 4
Default

Thanks for the reply Valley Hunter. I found one for $150, says it works for a White's MXT. Does that cover the MXT300?
Reply With Quote


  #4  
Old 06-11-2021, 03:32 PM
Eightball3 Eightball3 is offline
New Member
 
Join Date: Jun 2021
Posts: 4
Default

Do you think its worth putting the 150 into this detector?
Reply With Quote


1 members found this post helpful.
  #5  
Old 06-11-2021, 04:00 PM
Valley Hunter's Avatar
Valley Hunter Valley Hunter is offline
Senior Member
 
Join Date: Jun 2012
Location: Merced Ca.
Posts: 427
Default

MXT has White letters
MXT 300 has gold letters the 300 means it came with the 300 mm (12") coil


Yes the 6 x 8 will bring the detector to life $150 seems high ..
Another option is the 9,5" CC or 10" DD coil that is stock for the MXT

__________________

Minelab Equinox 600, Vanquish 540, Nokta Makro Simplex+, Garrett AT Max & Ace Apex
Reply With Quote


  #6  
Old 06-11-2021, 04:12 PM
Eightball3 Eightball3 is offline
New Member
 
Join Date: Jun 2021
Posts: 4
Default

The "MXT300" on my unit is white letters. the "White's" and "mm" are in gold letters.

Is this the one I need? What frequency do I need? Thanks again for your help.

https://www.metaldetector.com/detech...tes-dfx-mxt-m6
Reply With Quote


  #7  
Old 06-11-2021, 06:23 PM
Valley Hunter's Avatar
Valley Hunter Valley Hunter is offline
Senior Member
 
Join Date: Jun 2012
Location: Merced Ca.
Posts: 427
Default

"I believe to coil is bad"
Check to see if it has a coil cover dirt / sand could cause the issue

__________________

Minelab Equinox 600, Vanquish 540, Nokta Makro Simplex+, Garrett AT Max & Ace Apex
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.