Fisher Impulse... was he right?

No brownie points from me, for losing the muck boots at the beach , agree the Whites cable lock downs are made for Whites- long-lasting higher-grade cables & shafts :crazy::crazy::crazy::crazy::crazy::crazy::sarcastic::twisted: Steve OBN will give you all the info . needed on the AQ , the Garrett- Axiom isn't a Salt beach/water machine, they forgot the Salt Water/ Beach Hunters :( A nugget buster :chaplin::nothingtoadd:
One is never to experienced to learn, I never though of those cable clamps... As a issue. I do remember on my excalibur honing them out for a less tight fit and found I liked taping the cable instead.

I haven't seen the inside of the cable. It's the thickest, or 1 of the thickest, coil cables I've seen. It works flawlessly without the clamps. Someone that is familiar with the inside workings will know the answer.
I only have pictures of the cable that Eric Foster used on a experimental 10 inch coil (which he made 8 of them?) , I never had any issues with the stock cables. Here is Erics black cable and the fix ........ and his notes on the wiring ...

AQ coil cable bad fixed.png


Erics Diagram he sent to Thomas Mc in VB, Thomas and Eric were good friends and that is how the 10inch coil came about. Thomas sent Eric a AQ to get the coils made. Eric loved the AQ so much he wanted to keep it, but finally he did return it.. a few years later he passed.

aq coil iribg (2).jpg
 
Steve,
Could you post a video showing the problem? I’d like to better understand what is happening, any chance I could borrow the clamps to see the issue on my AQ?

Barry
 
Can you cut it so we can see the inside ?🤣... I know you got that so you must be the only one on the beach with the AQ to go deeper than your 50 buddies with MLs. Much success for you and let's see some Gold pic's !
most have never seen a white coil like this and with digging so many holes it got them thinking.. so they came over and started taking videos. But they kept their machines on and detected 3ft away from me... just to be sure I was finding gold.
There is no way to defend against this.
 
from 5:58 to around 6:50 Listen to the threshold. Mine was worse.
That's the first time I've seen that video and noticed several things I would change on the AQ.

Interesting also the Axion sounds just like the ATX and the Infinium LS.. Low High-High Low reply. Never liked the (LS) because of that..

Look at the difference.. swing speed



My settings ... hunting in saltwater.. audio almost as smooth as glass other then it does love the scoop and the Souriua coil fitting coming out of the water can be a little 🔊:pullhair:

Also a little trick I use to center those spread out (slow) ramp up, ramp down deep targets...... is to dig a scoop of sand, find the target again ..... swinging over it, then pump the coil to center up the target. It will come in stronger but make sure it is a target for you can be chasing nothing if your not careful.. basically your slowly swinging over the target while pumping the coil to zero in on its strongest signal.

Good Luck and keep us informed..
 
Last edited:
Can you cut it so we can see the inside ?🤣... I know you got that so you must be the only one on the beach with the AQ to go deeper than your 50 buddies with MLs. Much success for you and let's see some Gold pic's !
figure you would get a kick of this. My old TDI. I had to cover up the names so that when they took the photos and searched for it, the search would come up empty or a spongebob doll would come up. The headphones are even worse. I had to decorate them in a way so people wouldn't be scared and call the cops, but clever enough to hide the names and f up the search engines.. All for nothing thanks to the mcore...
 

Attachments

  • a.jpg
    a.jpg
    63.2 KB · Views: 49
  • b.jpg
    b.jpg
    90.9 KB · Views: 59
That's the first time I've seen that video and noticed several things I would change on the AQ.

Interesting also the Axion sounds just like the ATX and the Infinium LS.. Low High-High Low reply. Never liked the (LS) because of that..

Look at the difference.. swing speed



My settings ... hunting in saltwater.. audio almost as smooth as glass other then it does love the scoop and the Souriua coil fitting coming out of the water can be a little 🔊:pullhair:

Also a little trick I use to center those spread out (slow) ramp up, ramp down deep targets...... is to dig a scoop of sand, find the target again ..... swinging over it, then pump the coil to center up the target. It will come in stronger but make sure it is a target for you can be chasing nothing if your not careful.. basically your slowly swinging over the target while pumping the coil to zero in on its strongest signal.

Good Luck and keep us informed..
that 17" is coming in real loud... and the threshold sounds perfect.
 
  • Like
Reactions: OBN
I don’t really use my threshold - just enough to know it’s on. If these clips are causing a problem what are the physics of it? Some cables have metal shields that the coil can detect. Others have wire insulation that is piezoelectric and will generate a voltage on the coil wires from wind or cable movement. A carbon fiber shaft is detectable. Which is it?
I hear weirdness at 6:47 and beyond. Mine did have a lot of that early on. Mainly when using the metal hydride battery as its voltage dropped. Sometimes it would go completely bonkers. My fix seemed to be a bad connection at the delay switch and maybe OBNs battery. I have a video on my channel of the switch issue. I use Velcro straps to fixate the cable.
 
Last edited:
Has anyone else duplicated this? I’ve had mine go crazy even recently occasionally but ground balancing or power reset calmed it down. When the battery is about done it can happen too. NIMH has a more gradual voltage decay so can be a factor.
 
Has anyone else duplicated this? I’ve had mine go crazy even recently occasionally but ground balancing or power reset calmed it down. When the battery is about done it can happen too. NIMH has a more gradual voltage decay so can be a factor.
my battery has a voltage regulator on the board. once I removed the clips I could run it wide open. with the clips on I could just be standing there and it would start whaling away. I thought it was emi. Is it possible a wire inside yours has got water in it or damaged another way? Maybe a multimeter testing the pins in the coil connector.. I'm not sure if that will work or not, but worth a try if you can.
 
Mine freaks out so rarely I don’t worry about it. In the video, there must be a poor wire connection to the switch. It’s pretty stable now. I tried testing for piezoelectric indications but didn’t see any. Way more pleasant to use vs the DF.
 
  • Like
Reactions: OBN
Mine freaks out so rarely I don’t worry about it. In the video, there must be a poor wire connection to the switch. It’s pretty stable now. I tried testing for piezoelectric indications but didn’t see any. Way more pleasant to use vs the DF.
Amen to the DF noise! Craig and several others mastered the DF, me to much garble noise. Picking out a deep target with it you really had to have a good idea of what to listen for, never could get that part of me in tune.

I think I shared with all AQ owners that both of my AQ's... if they are acting up while swinging.. which they will from time to time, I will change the delay up to (say) 10 or 11 which calms it some, then I turn it back down to 9 or 10 and it is smooth as glass. Also I noticed sometimes it can be noisy (when in the water) if I'm going against the current or waves, the above delay change fixes that in combination with a slower swing speed. I love the AQ but it really takes a patient hunter to work out the quarks that can make or break your success with it.

And by no means am I recommending it ..buy a Manticore or Nox
 
Amen to the DF noise! Craig and several others mastered the DF, me to much garble noise. Picking out a deep target with it you really had to have a good idea of what to listen for, never could get that part of me in tune.

I think I shared with all AQ owners that both of my AQ's... if they are acting up while swinging.. which they will from time to time, I will change the delay up to (say) 10 or 11 which calms it some, then I turn it back down to 9 or 10 and it is smooth as glass. Also I noticed sometimes it can be noisy (when in the water) if I'm going against the current or waves, the above delay change fixes that in combination with a slower swing speed. I love the AQ but it really takes a patient hunter to work out the quarks that can make or break your success with it.

And by no means am I recommending it ..buy a Manticore or Nox
It sure doesn't look good for the future of Fisher when a customer drops $2k on a detector and then emails them saying a part is defective, making all the detectors that have the same part defective too... and a week later, not even so much as a confirmation email response from them.
 
  • Wow
Reactions: OBN
We tend to get better response from Carl Moreland than whomever else at “Fisher” is really supposed to be taking care of us. Other owners have some kind of relationship with higher ups that get their concerns addressed outside of normal channels. First Texas treats us like an annoyance. Calls rarely returned. You might eventually get in touch with someone but I doubt it will be someone who shares with you the things they have learned about the Limited edition and if/when a follow-up model will show up.
There also was to be a prospecting/gold version. Steve from Detector Prospector really shot down the prospect of using the Limited for land use based mainly on theoretical design knowledge. But has anyone ever given one a try on Arizona deserts for example?
 
We tend to get better response from Carl Moreland than whomever else at “Fisher” is really supposed to be taking care of us. Other owners have some kind of relationship with higher ups that get their concerns addressed outside of normal channels. First Texas treats us like an annoyance. Calls rarely returned. You might eventually get in touch with someone but I doubt it will be someone who shares with you the things they have learned about the Limited edition and if/when a follow-up model will show up.
There also was to be a prospecting/gold version. Steve from Detector Prospector really shot down the prospect of using the Limited for land use based mainly on theoretical design knowledge. But has anyone ever given one a try on Arizona deserts for example?
As far as my direct connection at Fisher, it was Eva O Shea.. Very helpful, Very Nice Lady, sadly she retired in 2023? I did ask Carl a few questions after she retired over on Steve's forum by messages and he always got back to me. I don't think he was part of the AQ work other then he knew what was going on. Rick early on was a good connection but he did jump ship after a few years. So really there was no one any of us could or can call direct and speak with about the AQ. I would imagine I was called, messaged, texted more then anyone at Fisher on the AQ.

My words, Buy a Manticore or Nox
 
and a week later, not even so much as a confirmation email response from them.
Sorry, just saw this thread. Do you know who you contacted? There was supposed to be 2 clamp sizes included, one for the lower rod and a bigger one for the middle/upper rod.
 
  • Like
Reactions: OBN
Sorry, just saw this thread. Do you know who you contacted? There was supposed to be 2 clamp sizes included, one for the lower rod and a bigger one for the middle/upper rod.
If I recall correctly, neither of the clamps would fit onto the upper shaft. I put one about 1 12" inches above the clevis, and the second an inch or so below the clamp—just about the same spots as in the YouTube video above. . Both were a very tight fit onto the lower shaft. When I took the first one off, it shot across the room. The email address I sent my message to was listed on the testing results paperwork. There was no name, just an email address.
The detector was working perfectly once the clamps were removed.
 

Attachments

  • q.png
    q.png
    176.8 KB · Views: 42
Last edited:
  • Like
Reactions: OBN
Back
Top Bottom