Equinox 800 High Pitched Coil Hum

Frequency12

New Member
Joined
Sep 29, 2026
Messages
1
Just recently purchased an Equinox 800. There is a high pitched coil whine coming from the control box. The pitch is worst in multi frequency mode, not as bad in single frequency, changes to higher pitch as you go from 4-40hz.

Just to be clear, this is not threshold tone or interference, this is noise coming from an electrical component inside the control box. Do all Equinox's do this or did I get a bad one?

Disappointing as multi is the main operational mode. It's very annoying though headphones blocks most of it out, it still doesn't seem right.

This is what Google had to say:

If it's coming from the Control Box (True Coil Whine)
Some users report a faint, very high-pitched physical squeal coming directly out of the Equinox 800 control box housing, usually more noticeable when using the Multi-IQ frequency modes.
The Cause: This is true, harmless coil whine. The internal circuitry is driving a massive amount of power to pulse multiple frequencies down to the search coil simultaneously. The internal electronic inductors inside the head unit are vibrating mechanically.

I think it's coming where the coil plugs in:

Why is it humming right at the plug?
The Minelab Equinox 800 uses Multi-IQ technology, meaning it pumps multiple frequencies into the coil at the exact same time. This requires a relatively high alternating current (AC).
Right behind that plug socket inside the housing sit the power-filtering inductors and copper traces.
As the heavy Multi-IQ electrical current rapidly switches directions thousands of times per second, it creates a microscopic magnetic push-and-pull.
If the internal coils or the pins on the plug are vibrating against each other at an audio frequency, it acts like a tiny speaker, projecting a very faint, high-pitched hum right out of the plastic casing around the connection port.
 
Last edited:
Back
Top Bottom