oldkoot
Elite Member
I have been testing the 1.10 Beta test version, and other than a couple issues that I have personally witnessed on the Legend I did the testing with I am really liking this new version 1.10 which will be changed to 1.11 once final
The TIDs (Target IDs for newbies) seem much more stable from previous versions with this Beta Test version 1.10, when the Legend locks on to a target I am not seeing the IDs jumping all over the place like they were for me, also on the ground I detect the GB (Ground Balance) seems to be more stabilized from previous versions, I have two legends one I have not updated just yet but will, so my observations are from running one legend with 1.10 and the other with 1.09 side by side, the tones are another thing I have noticed on the Legend with 1.10 I thought the tones were good in 1.09 but the 1.10 tones sound even better to me.
one thing I have also noticed is when the coil gets over a target in the 1.10 version the target is almost dead center on the 11 inch coil on the center bar that runs from heel to toe just ahead of the stem (this seems to be the hot spot) on the 11 inch coil, the 11 inch coil when I have located a target and wiggle back from said target seems to be even more sensitive at the front edge of the 11 inch coil then what it was in previous versions, it just seems to be way more sensitive at the edges of the 11 inch coil from previous versions, the depth of the Legend with 1.10 also seems to be even deeper in my ground which is extremely mineralized, the legend with the 1.10 version seems to get through my mineralized ground much much better than previous versions, I am seeing depths that I could not achieve with the previous versions on my legend with the 1.10, and I am not talking small depth changes but 2-5 inches of gained depth in 1.10, my Legend with the 1.10 I can now run my Sensitivity up to around 25-27 where before I could only get it to 15-19 before it would get so noisy that it was UN bearable,
Now to my question where should the hot spot on the Legend 11 inch coil be or what is others observations as to where the hot spot is
The TIDs (Target IDs for newbies) seem much more stable from previous versions with this Beta Test version 1.10, when the Legend locks on to a target I am not seeing the IDs jumping all over the place like they were for me, also on the ground I detect the GB (Ground Balance) seems to be more stabilized from previous versions, I have two legends one I have not updated just yet but will, so my observations are from running one legend with 1.10 and the other with 1.09 side by side, the tones are another thing I have noticed on the Legend with 1.10 I thought the tones were good in 1.09 but the 1.10 tones sound even better to me.
one thing I have also noticed is when the coil gets over a target in the 1.10 version the target is almost dead center on the 11 inch coil on the center bar that runs from heel to toe just ahead of the stem (this seems to be the hot spot) on the 11 inch coil, the 11 inch coil when I have located a target and wiggle back from said target seems to be even more sensitive at the front edge of the 11 inch coil then what it was in previous versions, it just seems to be way more sensitive at the edges of the 11 inch coil from previous versions, the depth of the Legend with 1.10 also seems to be even deeper in my ground which is extremely mineralized, the legend with the 1.10 version seems to get through my mineralized ground much much better than previous versions, I am seeing depths that I could not achieve with the previous versions on my legend with the 1.10, and I am not talking small depth changes but 2-5 inches of gained depth in 1.10, my Legend with the 1.10 I can now run my Sensitivity up to around 25-27 where before I could only get it to 15-19 before it would get so noisy that it was UN bearable,
Now to my question where should the hot spot on the Legend 11 inch coil be or what is others observations as to where the hot spot is