![]() |
![]() List all sponsors |
|
#1
|
|||
|
|||
|
Greetings Fellow F2 Md'ers:
Thought I would start a thread about the F2 - What have you found with the read out of the F2?. Here is what I have found: VDI Reading: 33 - 35: Nickel VDI Reading: 62 - 64 newer pennies VDI Reading: 72 - 73 older pennies VDI Reading: 74 - Dime VDI Reading: 79 - 80 Silver ring VDI Reading: 85 - 86 Quarter VDI Reading: 95 Half Dollar I have also found gold rings under the 45 - 49 readings as well. Curious to see what other F2 MDers are seeing? Thanks, Gotcha |
|
#2
|
||||
|
||||
|
I got my girlfriend th F2 and it will be here in a few days. Im going to try it out for a few days and let you know what I come up with. Have you found a vid chart that shows what stuff should come up under what numbers?
__________________ |
|
#3
|
||||
|
||||
|
You know I have found several pennies with iron, I know that the F2 doesn't have an Iron mask but it was sort of funny that I found pennies on top of iron nails. I really think that I have under estimated the F2 for sure. I will start to take note and post it here along with you.
|
|
#4
|
||||
|
||||
|
Quarters read a 79-82 on my F2, and I get dimes usually at 67 on the VDI
I really enjoy my F2 __________________ |
|
#5
|
||||
|
||||
|
Quote:
Had a solid zinc signal once and popped a shallow nickel...still cannot figure that one out Zinc pennies from 59-64 Dimes 71-74 usually Steel pennies 73-76 All my silver rings rang in at a solid 71...larger ones could be your 79-80 Quarters are usually a solid 80-82 and eventually you can hear the difference in this tone than most other targets that come in here. It's just fully rounded and beautiful! Never dug a 1/2 or a dollar with the F2 so I don't know about that. These are from my air testing on some silver and gold rings and from another member's air testing on some coins.(Mike1961) Could be different in your soil, and I see some of your readings are different from my coin readings too. By the way...there is a thread about the F2 started by yours truly. Everything I know and learn and discover and find goes in here. It wanders a bit from time to time, but lots of info there. Feel free to contribute if you like. Always thrilled to learn something new about this fantastic little powerhouse! About 7000 views, so far. http://metaldetectingforum.com/showthread.php?t=53930 HH __________________ |
|
#6
|
||||
|
||||
|
Just to add...I've found that if i get a 35 it's always been a newer pop/beer tab...always.
and 45 has always been the old style of ring pull....but I dig them anyway, never know when a ring is going to pop. Son and I were out at a tot lot and stayed at a stead 44/45 told son "that's a ring" and it was... 67-73 has always been zincoln, copper penny, dimes 80-84 quarters, sometimes 85..but lately 85 has been nails...alot of nails...and washers. 98-00 silver....or a really huge hunk of something buried. 29-33 nickel. 41,44,48 gold ring (well, at least my wedding band) __________________ |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Why do sidewalk tear-outs work so well,,, ???? | grouser | General Hobby Discussion | 4 | 09-17-2012 01:09 PM |
| Tear outs | Godzillabob2 | Coinshooters and Relic Hunters | 3 | 03-28-2012 09:07 PM |
| where can I get sidewalk tear outs & Reservoir/lake draining? | NHKeith | Research and Getting Permission | 10 | 02-15-2012 09:00 AM |
| Sidewalk tear-outs.....tresspassing?? | milco | Research and Getting Permission | 21 | 06-29-2010 09:06 AM |
| Coin cut-outs | Nortonics | Make It or Fix It Yourself | 14 | 01-21-2009 02:45 PM |