What about Nox and deeper gold rings (test time)

tnsharpshooter

Supporter
Forum Supporter
Joined
Jan 26, 2015
Messages
12,296
Location
Middle TN
I got curious and borrowed this ring from my mother in law.
2j5dgkk.jpg


Says 10k on the inside, not too big a ring not real small either.
Ring IDs 9-10 air testing with Nox 800
So off to my clean area to bury.
Buried at7" deep.
No problem for Nox hitting with good ID in window.
Park 2 sens 23 speed 7 0 iron bias.

Well I buried on deeper a good solid 9" deep, could be as deep as 9.25" deep.
Same settings as above Nox hits the ring and IDs it. ID comes in window as 8/9and 10 on sweeps. Good tone even using speed 7, checked with speed 6 too good tone.

So I got curious and went and got the mighty Deus with 9" LF coil on.
I tried hot, deep, dues fast program--- no detection period Notta.
So I went back to house and broke out round HF coil 9".
I tried hot, deep, deus fast programs no detection period Notta.
Run high sens too, GB at ground reading using pumping.
Btw 6 ticks in Deus mineral strength meter so this ground not mild.
Didn't try 11" LF coil cause I didn't have it mounted to rod. I traded one of my 11" coils off a few days ago. Just so folks understand Deus tested using
Reactivity 1,2,2.5 and 3, while keeping silencer at-1. Round HF coil all freqs tried, even. 54khz. Deus would locate ring using pinpoint.

Thought I would share.
Might be some deep rings had with Nox, just saying.
 
Last edited:
Nox really seems to be a great gold machine. I wonder how it will do nugget hunting? I have not seen any input or videos of the Nox nugget hunting yet.

Sent from my SM-G950U using Tapatalk
 
Back
Top Bottom