Friendly Metal Detecting Forums   Metal Detector Spot
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Advice on Detector Purchase

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-01-2012, 11:57 AM
Seanpaul's Avatar
Seanpaul Seanpaul is offline
Senior Member
 
Join Date: May 2011
Location: College Station, TX
Posts: 268
Default Omega 8000 vs AT Pro. Ready? Go!!

I think I've narrowed it down to these two and want feedback from y'all especially if you have both. I was originally asking about the G2 vs AT Pro but think the Omega would be a better fit for me. Honestly, if the AT was not waterproof then I would go with the omega and this is after originally saying the waterproof factor wouldn't be considered. I think its so cool to be able to get in the water with it if I want to do so. From video observations the Omega seems to be faster and deeper with better separation and ID. It seems that way from those videos anyway. I like the larger screen too as the AT is a little smallish. I'm mainly a park hunter after coins and jewelry among a lot of bottle caps, tabs and other aluminum trash. The AT seems nose heavy too so I would have to purchase the Garrett Gizmo for it. So, what do y'all think? What to do, what to do?

Last edited by Seanpaul; 04-01-2012 at 08:08 PM. Reason: spelling
Reply With Quote


  #2  
Old 04-01-2012, 12:05 PM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Elite Member
 
Join Date: Dec 2011
Location: EARTH
Posts: 2,252
Default

I cant tell you honestly cause I have not received my AT PRO yet but I had the Omega...it was a nice machine but just to chatty for me. But if you have the 5x10 DD coil it sure helps out alot and then its a decent machine. But I have to really say AT PRO even tho I dont have one...but will soon. Cosmetically it was not built as nice at all compared to the wifes 705..which I LOVE!!! that is one nice machine..almost as nice as my SE PRO!! I hit coins this morning around 8 inches on stock coil. Waterproof stock coil.thats nice and really ID's coins nicely. My real honest opinion on the Omega..I was not real sold on it at all. Look at the 705 once as well..if water is hunting is not a real issue. It might be the way to go..real stable machine.

__________________
MINELAB CTX 3030, XP DEUS, STAVR EVROEXCAVATOR-2 v.22
2013 ~ Clad = $48.39, Gld = 0, Silver Coins = 11, IH = 7, Wheat = 94, Oldst = ? LC

Reply With Quote


  #3  
Old 04-01-2012, 12:49 PM
Bonesquat's Avatar
Bonesquat Bonesquat is offline
Elite Member
 
Join Date: Mar 2010
Location: North AL
Posts: 9,104
Default

All Garretts I've ever used are coil heavy and feel cheap.

__________________
E-trac/Compadre-SILVER coins(146)(0): 1848 O half | Halves: 4 | QRTS: 25 | Dimes: 108 | War N: 9 |AG jewel.: 37 ||| Other finds | Gold:12 | Wheats: 573 | IHs:6 Clad: $642

Reply With Quote


  #4  
Old 04-01-2012, 03:08 PM
Seanpaul's Avatar
Seanpaul Seanpaul is offline
Senior Member
 
Join Date: May 2011
Location: College Station, TX
Posts: 268
Default

Quote:
Originally Posted by AIRFORCEMIKE View Post
I cant tell you honestly cause I have not received my AT PRO yet but I had the Omega...it was a nice machine but just to chatty for me. But if you have the 5x10 DD coil it sure helps out alot and then its a decent machine. But I have to really say AT PRO even tho I dont have one...but will soon. Cosmetically it was not built as nice at all compared to the wifes 705..which I LOVE!!! that is one nice machine..almost as nice as my SE PRO!! I hit coins this morning around 8 inches on stock coil. Waterproof stock coil.thats nice and really ID's coins nicely. My real honest opinion on the Omega..I was not real sold on it at all. Look at the 705 once as well..if water is hunting is not a real issue. It might be the way to go..real stable machine.
Will the Omega quiet down with a little decreased sensitivity adjustment? I did notice on videos a little bit of spit and sputter here and there, maybe from emi or too high a sensitivity. Is that what you are referring to? What specifically did not sell you on the Omega? Was it just too noisy or missing targets that the 705 was picking up? What, in your opinion, would have made it better?
Reply With Quote


  #5  
Old 04-01-2012, 03:09 PM
Seanpaul's Avatar
Seanpaul Seanpaul is offline
Senior Member
 
Join Date: May 2011
Location: College Station, TX
Posts: 268
Default

Quote:
Originally Posted by Bonesquat View Post
All Garretts I've ever used are coil heavy and feel cheap.
I tried a friends' Ace 250 and it was very nose heavy feeling because of the short arm cuff rod. If I go AT Pro then I will install one of those Garrett Gizmo attachments to balance it out.
Reply With Quote


  #6  
Old 04-01-2012, 04:17 PM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Elite Member
 
Join Date: Dec 2011
Location: EARTH
Posts: 2,252
Default

Even on less sensitivity...it would still chatter alot and that did not matter where I was hunting..so not really an EMI issue they are just known to be that way. Now its performance was much better once I got the 5x10 DD coil on it.

But overall it was pretty decent machine..but not half as nice as the 705 my wife uses. I love all the options I have with the 705. Quick noise cancel, and GB...after that your set to swing. Preset Coin and prospecting options...just a nice machine and to me built better than the Omega.

__________________
MINELAB CTX 3030, XP DEUS, STAVR EVROEXCAVATOR-2 v.22
2013 ~ Clad = $48.39, Gld = 0, Silver Coins = 11, IH = 7, Wheat = 94, Oldst = ? LC

Reply With Quote


  #7  
Old 04-01-2012, 04:40 PM
Seanpaul's Avatar
Seanpaul Seanpaul is offline
Senior Member
 
Join Date: May 2011
Location: College Station, TX
Posts: 268
Default

Ok thanks a bunch Mike, that is something I will have to take into consideration as I generally do not like a noisy detector.
Reply With Quote


  #8  
Old 04-01-2012, 04:47 PM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Elite Member
 
Join Date: Dec 2011
Location: EARTH
Posts: 2,252
Default

Sean no problem my friend its just my opinion. I knew they were chatty but I took a chance and it just talked way to much for me. Most reviews will tell you they are noisy..but are coin killer..and i found my share. Good luck Sean its a tough decision..maybe you will love the 8000, you can find used ones for around 385..so keep your eye out.

__________________
MINELAB CTX 3030, XP DEUS, STAVR EVROEXCAVATOR-2 v.22
2013 ~ Clad = $48.39, Gld = 0, Silver Coins = 11, IH = 7, Wheat = 94, Oldst = ? LC

Reply With Quote


  #9  
Old 04-04-2012, 08:57 AM
Big Boys Hobbies's Avatar
Big Boys Hobbies Big Boys Hobbies is offline
Sponsor
 
Join Date: Oct 2006
Location: Oklahoma City OK
Posts: 2,839
Default

If you adjust frequency on the 8000 it will help with the noise. The dd coil on the omega help as well.

__________________
Bart Davis forum sponsor
Call email text, mention Friendly Forum for best deal!
Bigboyshobbies.net 405-206-9010 Bart@BigBoysHobbies.net
Authorized Minelab Metal Detectors Fisher Teknetics Garrett XP Deus
Minelab partner of the year for 2012. Minelab customer service award 2012.

Reply With Quote


  #10  
Old 02-23-2013, 11:00 PM
iBuySilver's Avatar
iBuySilver iBuySilver is offline
Senior Member
 
Join Date: Feb 2013
Location: Alabama
Posts: 375
Default

........Bump................For more info on this topic

__________________

F2/Sniper- *2013*Gold= 0 Silver = 1 Pocket Change=$12.00+
*Electrolysis- http://www.youtube.com/watch?v=54ADeB6V1rQ
Reply With Quote


  #11  
Old 02-24-2013, 11:49 AM
detectingMO's Avatar
detectingMO detectingMO is offline
Elite Member
 
Join Date: Jun 2012
Location: Columbia, MO
Posts: 626
Default

Apples to Oranges. Depends on hunting style and preference. Both great machines. I'd google "omega vs at pro". Lots of great info out there on many sites including this one. I find findmall and dankowski have the most technical info.

__________________
Teknetics T2SE - 11" & 5" DD coils - ProPointer/Lesche/Sampson
Clad $21.30, 8 tokes, 16 wh, 6 silvers, 1 two cent

Reply With Quote


  #12  
Old 02-24-2013, 11:57 AM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Elite Member
 
Join Date: Dec 2011
Location: EARTH
Posts: 2,252
Default

I have owned them both, and if I had to pick between them to the AT was a better machine. Much quieter and waterproof. Now the display is alot nicer on the 8000 tho but all is preference.

__________________
MINELAB CTX 3030, XP DEUS, STAVR EVROEXCAVATOR-2 v.22
2013 ~ Clad = $48.39, Gld = 0, Silver Coins = 11, IH = 7, Wheat = 94, Oldst = ? LC

Reply With Quote


  #13  
Old 02-24-2013, 12:08 PM
Detector's Avatar
Detector Detector is online now
Elite Member
 
Join Date: Jan 2006
Location: Dodge City KS
Posts: 6,158
Default

Owned both and both are great detectors for the money. If I did mostly relic hunting I'd probably go with the 8000, but I prefer the AT Pro.

__________________
Current: E-Trac, AT Pro
Past: CTX 3030, V3i, DFX, F75 LTD, XP Deus, MXT, Omega 8000, SE Pro

Reply With Quote


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Omega 8000 vs AT Pro iBuySilver General Hobby Discussion 7 02-24-2013 04:39 PM
Omega 8000 or T2 SE? TN_INDIAN All About Detectors 18 01-22-2013 03:44 PM
Need help with Omega 8000? AIRFORCEMIKE All About Detectors 4 02-26-2012 12:45 PM
Omega 8000 Allan All About Detectors 2 06-26-2011 02:31 PM


All times are GMT -4. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.