Not using Mixed Mode on your White's? Better think twice!

Fredneck said:

itsaring! said:

If you scroll down on the DFX you'll see where it says mixed mode. You just check the "on" box.[/

N/t

Click to expand...

N/t ?
Using the arrow button on the left when you scroll down through the adjustments on the DFX and want to change any settings you push the button that says enter. Then make the settings you want, then use the menu button to change back, so you can scroll down for more adjustments. Hope this explains it better for you.

Click to expand...

graybeard said:

Fredneck said:

N/t ?
Using the arrow button on the left when you scroll down through the adjustments on the DFX and want to change any settings you push the button that says enter. Then make the settings you want, then use the menu button to change back, so you can scroll down for more adjustments. Hope this explains it better for you.

Click to expand...

No text- once I realized the post was from 7 years ago. It stated the best depth performance from MM is achieved with a higher DC sense (all metal) setting which clashes with VCO. My happy place with the XLT is DC sense at 55 and Ratchet PP "on".

Click to expand...