Friendly Metal Detecting Forums   Big boys Hobbies
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > How to Use Your Metal Detector

Reply
  
Thread Tools Display Modes
  #1  
Old 03-30-2018, 11:01 PM
SGWiley's Avatar
SGWiley SGWiley is offline
Junior Member
 
Join Date: Mar 2012
Location: Northern NJ
Posts: 67
Default Overwhelmed switching from Ace 250 to Xterra

I took my Xterra out today for a little while, and quickly felt overwhelmed with all the settings. The tones were unfamiliar, the display with the numeeic value was foreign to me. I felt like I didn't set it up properly.
Gods honest truth, I boxed it back up, and was ready to just stick with the ACE 250 since i knew it better.
Then a little voice inside me said..."you barely gave it a chance. Do more research, look for instructional resources."
So tonight I found an EBook by Randy "Digger" Horton called Understanding Your Xterra. Folks have called it the Xterra bible.
I'm starting to feel better and cant wait to give it another go tomorrow 😊

__________________
Garrett AT Max, Garrett Ace 250
2018 YTD (Clad- $2.04 )

Reply With Quote


  #2  
Old 03-30-2018, 11:13 PM
Darktower007's Avatar
Darktower007 Darktower007 is offline
Supporter
 
Join Date: Mar 2017
Location: Chattanooga Tennessee
Posts: 658
Default

Give it time. When I went to the Etrac from the at pro? Oh golly 2 sets of numbers!

But then this started to happen.
No machine I have used sucks deep silver like Minelab out of the ground.

I watched many videos and stuck with it.

I have since long sold my at pro.

Keep at it X Terra is a great machine. One thing too is with most Minelabs (pre-equinox) you need to work the area slower. Slow your speed down to get deep coins.


Sent from my iPhone using Tapatalk
Attached Images
 

__________________
XP Deus-Minelab E-Trac- Garrett Carrot
2018 totals: 20 Silver Coins 1 Silver Ring; Gold Ring: 1
Best Hobby On Earth!

Reply With Quote


  #3  
Old 03-30-2018, 11:29 PM
SGWiley's Avatar
SGWiley SGWiley is offline
Junior Member
 
Join Date: Mar 2012
Location: Northern NJ
Posts: 67
Default

Originally Posted by Darktower007 View post
Give it time. When I went to the Etrac from the at pro? Oh golly 2 sets of numbers!

But then this started to happen.
No machine I have used sucks deep silver like Minelab out of the ground.

I watched many videos and stuck with it.

I have since long sold my at pro.

Keep at it X Terra is a great machine. One thing too is with most Minelabs (pre-equinox) you need to work the area slower. Slow your speed down to get deep coins.


Sent from my iPhone using Tapatalk

Thanks for the encouragement! I'm watching videos now and schooling up on this machine.
Can't wait to take it out again!

__________________
Garrett AT Max, Garrett Ace 250
2018 YTD (Clad- $2.04 )

Reply With Quote


  #4  
Old 03-31-2018, 02:23 AM
Longhair's Avatar
Longhair Longhair is offline
Elite Member
 
Join Date: Apr 2011
Location: Mid Michigan
Posts: 3,973
Default

Give it time. The Xterra's are highly underrated.
To learn the tones and how slow you should sweep, run zero Disc, Multi-Tone, and go slow enough to hear each signal individually. It won't take long before your brain ignores the most common iron tones and keys on the ones that you find produce.

Also, remember that the GB scale is opposite of what you're used to. The lower the number the hotter the ground, and the higher the number the milder the conditions.

__________________

The best that you know is the best that you've had.
Slow Down, and you'll achieve a more harmonious outcome.
Reply With Quote


  #5  
Old 03-31-2018, 05:51 AM
Wom 27's Avatar
Wom 27 Wom 27 is offline
Elite Member
 
Join Date: Aug 2012
Location: Media,pa
Posts: 1,589
Default

I bought a Deus . Same story! Can't wait till next summer when hopefully I will be past all the uncertainty !

__________________
AT PRO, 12 Large cents, 2 class rings,Nova ,, Barber Half, 1833 Hard Times token ,"American Digger",oldest-1719 half penny,1730's one Reale
The more I detect, the luckier I get !

Reply With Quote


  #6  
Old 03-31-2018, 10:49 PM
jl1252's Avatar
jl1252 jl1252 is offline
Full Member
 
Join Date: Mar 2016
Location: Grass Valley, Ca
Posts: 177
Default

Originally Posted by SGWiley View post
I took my Xterra out today for a little while, and quickly felt overwhelmed with all the settings. The tones were unfamiliar, the display with the numeeic value was foreign to me. I felt like I didn't set it up properly.
Gods honest truth, I boxed it back up, and was ready to just stick with the ACE 250 since i knew it better.
Then a little voice inside me said..."you barely gave it a chance. Do more research, look for instructional resources."
So tonight I found an EBook by Randy "Digger" Horton called Understanding Your Xterra. Folks have called it the Xterra bible.
I'm starting to feel better and cant wait to give it another go tomorrow 😊
I have been running the 505 for 2 years now. It's a great machine. I would recommend running it in 4 tone (as 99 tones can be overwhelming), and all metal at first. Dig it all. 3-9 is gonna be foil, 12 is a nickle and sometimes modern soda tabs, 15-18-24 are various pull tabs and can slaw. 27-33 are pennies. 36-39 are dimes and 42-45 are quarters/silver rings. 48 is usually iron nails, etc.

The above is just general guide based in my red clay soil, ymmv. Good luck and don't give up on it,

__________________
Minelab X-terra 505 / Deteknix X-Pointer / Deteknix Diamond Digger / Predator Model 76 (Intrepid)
Best finds: 1861 S Seated Liberty Dime (see avatar) / 1926 S Standing Liberty Quarter
Clad total to date = $26.60

Reply With Quote


  #7  
Old 04-01-2018, 01:28 AM
tnsharpshooter's Avatar
tnsharpshooter tnsharpshooter is offline
Elite Member
 
Join Date: Jan 2015
Location: Middle TN
Posts: 7,406
Default

Originally Posted by SGWiley View post
I took my Xterra out today for a little while, and quickly felt overwhelmed with all the settings. The tones were unfamiliar, the display with the numeeic value was foreign to me. I felt like I didn't set it up properly.
Gods honest truth, I boxed it back up, and was ready to just stick with the ACE 250 since i knew it better.
Then a little voice inside me said..."you barely gave it a chance. Do more research, look for instructional resources."
So tonight I found an EBook by Randy "Digger" Horton called Understanding Your Xterra. Folks have called it the Xterra bible.
I'm starting to feel better and cant wait to give it another go tomorrow 😊
It helps if you will get you some coins, junk targets, nails, bottle caps.
And play around with your detector sweeping them.
Then start mixing them up some, adjusting spacing and sweep.
Try to get an idea of what the detecfor is telling you tonally and with numbers.
This is a more controlled setting for you.
I do this with every detector I get.
Before I venture out in the wild.
And even redo above after I have been in the wild detecting.

One hunt- don't ever discount a detector.
Not even 2 hunts.
Leave the ace 250 at home- no crutch that way.
Keep at it, it'll come to you.

__________________
Another Minelab Equinox 800 inbound, Minelab Equinox 800, Minelab Etrac, Minelab XS Explorer, 2-Xp
Deus
, Nokta Impact, Deep tech Warrior, Detech Chaser
Pinpointers -- Garrett Propointer, White's TRX, Makro, XP MI-6,,remote travels use Can am Defender Hd10Xt side by side


Last edited by tnsharpshooter; 04-01-2018 at 01:44 AM.
Reply With Quote


1 members found this post helpful.
  #8  
Old 04-02-2018, 08:35 PM
chillforlife chillforlife is offline
Full Member
 
Join Date: Oct 2015
Posts: 206
Default

Hang in there man, it's a great machine and is a blast to use. And very accurate and deep.
Reply With Quote


  #9  
Old 04-04-2018, 10:27 AM
groundhog53946's Avatar
groundhog53946 groundhog53946 is offline
Elite Member
 
Join Date: Jun 2015
Posts: 937
Default

I remember that feeling also two years ago going from an f2 to a CTX 3030! All the noise and the numbers! Just started to dig it all and it starts clicking. Now two years later I'm still learning but understand a lot more and look forward to each outing. You will get it.


Sent from my iPhone using Tapatalk
Reply With Quote


  #10  
Old 04-04-2018, 03:19 PM
metaladdict's Avatar
metaladdict metaladdict is offline
Elite Member
 
Join Date: Mar 2010
Location: Santa Rosa, Ca.
Posts: 8,738
Default

Keep going with the x terra, the Ace is for beginning.

__________________
Detectors. Garrett AT Pro,Ace 250.Minelab Sov Elite! Equinox 800!!!!
They can have my metal detector when they pry it from my cold dead hands!! John 14:6.

Reply With Quote


  #11  
Old 04-06-2018, 01:12 AM
zeemang zeemang is offline
Elite Member
 
Join Date: Feb 2010
Location: South of there
Posts: 17,738
Default

Do not even bring the ace with you on a hunt, it is too easy to give up on a new machine out of frustration. Keep at it, I made the same jump years ago from an ace 250 to the x terra 705. Thing drove me NUTS at first. Do yourself a favor and do not run in max amount of tones for awhile, stick with 4 tone otherwise it will sound like a robot from star wars which will make no sense to you.
Swing slow and take your time listening for the higher tones amongst the garbage. The machine will teach YOU how it wants to be swung to be steady and smooth. Nice smooth low swings and the narrow in more and more until you are right over the target, no need to pinpoint after awhile.
Try to put in as much time as you can with it, for me the first few hunts just confused me, but after maybe ten hours I started to get it and after hundreds of hours I continued to be impressed.

__________________
Excal II, Sov GT, X terra 705, e trac, woowhoo!
Living the American dream, just a bit further south...

Reply With Quote


  #12  
Old 04-06-2018, 08:14 PM
hoser's Avatar
hoser hoser is offline
Elite Member
 
Join Date: Jan 2006
Location: Grayling, MI.
Posts: 3,961
Default

The Exterra is a great machine, and given some time it will be an outstanding coin finding monster. All detectors take a while to get to know, but this one should not take any time at all. Go get the treasure.

__________________
Minelab ETrac, Minelab Exterra 705, Garrett AtPro,Fisher F2, Fisher F5, Garrett ProPointer (3)Garrett Carrot PP, Vibra-Probe560 PP. I'll stop detecting when they run out of DIRT!

Reply With Quote


1 members found this post helpful.
  #13  
Old 04-14-2018, 11:55 AM
oldkoot oldkoot is offline
New Member
 
Join Date: Jan 2017
Posts: 17
Default

[QUOTE=Longhair;2923901]Give it time. The Xterra's are highly underrated.
To learn the tones and how slow you should sweep, run zero Disc, Multi-Tone, and go slow enough to hear each signal individually. It won't take long before your brain ignores the most common iron tones and keys on the ones that you find produce.

Also, remember that the GB scale is opposite of what you're used to. The lower the number the hotter the ground, and the higher the number the milder the conditions.[/


Longhair is correct the 705 takes some time to get accustomed to and it can be over whelming I have been using one since 09 or 2010 and it was a vary confusing machine when i first started out with it my wife and I purchased two machines around the same time one was the AT PRO and the other was the 705 the pro was new and the 705 we purchased used from the same dealer the ATP was for my wife and the 705 for myself it took me almost two years to finally get a clear understanding of what the 705 was telling me as I am not a quick study but I stuck with it and once the light bulb turned on as to what the 705 was saying it has been a love affair ever since there was times I wanted to wrap it around a tree LOL but I stuck with it I feel the 705 is still to this day one of the most under rated detectors on the market and the ATP one of the most over rated

one suggestion I have for you if you have not already done it is to go to the minelab site and down load the eBook written by Randy Horton called Understanding Your XTERRA it is full of all kinds of tips and a great tool to use for learning the 705 download it,print it and read it several times and then re read it

The other suggestion I have which was stated in another response to you is to get it off of the 99 tones as they can be quite over whelming to get accustomed to set it to two or four tones and I believe you will find it less confusing.

I hunt almost exclusively in prospecting mode with the GB Tracking activated and that is due to what I detect for in Arizona.

hope this helps
Reply With Quote


  #14  
Old 04-16-2018, 09:53 AM
sandgroper's Avatar
sandgroper sandgroper is offline
Elite Member
 
Join Date: May 2016
Location: Western Australia
Posts: 2,793
Default

You should have the xterra figured out in no time if you regularly use it. I used my xterra70 for 7 or so years and it served me very well. Last year June I got myself a CTX. That one took a long time to learn and getting used to the new tones and buttons. I'm still learning stuff now.

__________________

Detectors: CTX 3030, X-Terra70, Pro-Find 25
2018 totals: $867.40AUD (307x$2, 175x$1, 40x50c, 137x20c, 168x10c, 187x5c, 139x2c, 207x1c) and 69 foreign, collectable or older Australian/English (pre-decimal) coins.
"Swing till your ears ring!"
Reply With Quote


  #15  
Old 04-22-2018, 10:52 PM
BeepAbyss BeepAbyss is offline
New Member
 
Join Date: Apr 2018
Posts: 18
Default

Originally Posted by zeemang View post
Do not even bring the ace with you on a hunt, it is too easy to give up on a new machine out of frustration. Keep at it, I made the same jump years ago from an ace 250 to the x terra 705. Thing drove me NUTS at first. Do yourself a favor and do not run in max amount of tones for awhile, stick with 4 tone otherwise it will sound like a robot from star wars which will make no sense to you.
Swing slow and take your time listening for the higher tones amongst the garbage. The machine will teach YOU how it wants to be swung to be steady and smooth. Nice smooth low swings and the narrow in more and more until you are right over the target, no need to pinpoint after awhile.
Try to put in as much time as you can with it, for me the first few hunts just confused me, but after maybe ten hours I started to get it and after hundreds of hours I continued to be impressed.
I just got a 705 myself and thanks for your suggestions.

Sent from my SM-J727VPP using Tapatalk
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 05:42 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.