• Forum server maintanace Friday night.(around 7PM Centeral time)
    Website will be off line for a short while.

    You may need to log out, log back in after we're back online.

NO GRAPHICS XLT

C

chuck76

whites spectrum xlt i turn it on and the backlight is all that comes on no graphics
ANY IDEAS?
 
This can be good or bad. Either the display has packed up totally or it might just be a case of checking the ribbon connector at the meter and the board. Remove,clean pins and replace then switch on and check for improvement. If still no good try a SLIGHT tap to check each end is seated fully.
Normal fault of lines across the display can usually be sorted by cleaning the connectors.
Other thing to check is is the machine still working on audio ? It should go to a default programme on switch on(operate trigger). If not its a main circuit board or chip problem and will need a trip to Whites. I should check this first before opening up the machine.
 
Back
Top Bottom