Walrus350
Elite Member
I went to the beach a couple days ago and my SS was working flawlessly. (with exception of EMI/RFI from aircraft and lifeguard towers)
I put in fresh recharchables and head to a beach a couple miles north. EVERY swing was a signal but only to the left. I attributed it to the fact it was high tide. I've been to that beach before, without the issue. I was pissed and left after messing with my settings, checking the coil cover for sand and checking for loose coil wire.
Here's a video:
https://youtu.be/zC1dI7_Q6Bw
On the drive home I was plotting for ways to sell my SS and what other detector to get. I can't return it to amazon because it's past the return. I re-read the manual and it says you get a warranty if you send the registration card 10 days after purchase. (I sent it in 2 weeks ago lol got it Dec 18th)
Then I remembered how the detector was after receiving it. It had 1 screw bouncing around the box. I took a pic and sent it to Tesoro. They said it would be okay for me to replace the screw. I just slapped it on without the ribbon behind it.
Apparently the screw holds the wire ribbon secure. At least that's what I figure why my machine was acting crazy today. So I unscrewed the assembly, tucked the ribbon behind the bracket and secured it.
Can you guys with SS confirm this is how it should look?
TOP: How my SS came out the box
BOTTOM: How I "fixed" my machine today
Hope this post made some sense.
I put in fresh recharchables and head to a beach a couple miles north. EVERY swing was a signal but only to the left. I attributed it to the fact it was high tide. I've been to that beach before, without the issue. I was pissed and left after messing with my settings, checking the coil cover for sand and checking for loose coil wire.
Here's a video:
https://youtu.be/zC1dI7_Q6Bw
On the drive home I was plotting for ways to sell my SS and what other detector to get. I can't return it to amazon because it's past the return. I re-read the manual and it says you get a warranty if you send the registration card 10 days after purchase. (I sent it in 2 weeks ago lol got it Dec 18th)
Then I remembered how the detector was after receiving it. It had 1 screw bouncing around the box. I took a pic and sent it to Tesoro. They said it would be okay for me to replace the screw. I just slapped it on without the ribbon behind it.
Apparently the screw holds the wire ribbon secure. At least that's what I figure why my machine was acting crazy today. So I unscrewed the assembly, tucked the ribbon behind the bracket and secured it.
Can you guys with SS confirm this is how it should look?
TOP: How my SS came out the box
BOTTOM: How I "fixed" my machine today
Hope this post made some sense.