Friendly Metal Detecting Forums   Quality Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Metal Detector Accessories

Reply
  
Thread Tools Display Modes
  #1  
Old 06-11-2018, 04:16 PM
OzarkDetector OzarkDetector is offline
Full Member
 
Join Date: May 2018
Location: Middle of the Ozarks, Mountain Home, Arkansas USA
Posts: 100
Default Anderson Shafts / Nox 800

Anyone know what the exact weight difference is from the stock shafts?
Reply With Quote


  #2  
Old 06-11-2018, 09:21 PM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Supporter
 
Join Date: Dec 2011
Location: EARTH
Posts: 4,357
Default

I donít see any different ones n weight but man itís sooooo much nicer when it comes to being sturdy with no flex


Sent from my iPhone using Tapatalk

__________________
MINELAB CTX 3030 , EQUINOX 800-X2

Reply With Quote


  #3  
Old 06-11-2018, 10:35 PM
usmceng1's Avatar
usmceng1 usmceng1 is offline
Full Member
 
Join Date: Aug 2010
Location: los angeles ca
Posts: 199
Smile

Dont feel much of a weight difference either if there is its real slight. Its just a well built no wobble shaft. Minelab skimped on the stock shaft, the anderson shaft really completes the NOX for its build quality and looks.

__________________
CTX/Etrac/Nox600/CZ21/SH Mk2/Omega8000/QuestQ20

Reply With Quote


  #4  
Old 06-11-2018, 10:36 PM
usmceng1's Avatar
usmceng1 usmceng1 is offline
Full Member
 
Join Date: Aug 2010
Location: los angeles ca
Posts: 199
Default

Originally Posted by AIRFORCEMIKE View post
I donít see any different ones n weight but man itís sooooo much nicer when it comes to being sturdy with no flex


Sent from my iPhone using Tapatalk
Nice to see you got your shaft mike. Hope it does well for you.

__________________
CTX/Etrac/Nox600/CZ21/SH Mk2/Omega8000/QuestQ20

Reply With Quote


  #5  
Old 06-12-2018, 03:46 PM
OzarkDetector OzarkDetector is offline
Full Member
 
Join Date: May 2018
Location: Middle of the Ozarks, Mountain Home, Arkansas USA
Posts: 100
Default

Ok, thanks everyone. I went ahead and ordered it.
When I get the shafts ill try to balance them on a digital scale I use to try and get a weight measurement.
Because knowledge is good.
Reply With Quote


  #6  
Old 06-12-2018, 04:15 PM
AIRFORCEMIKE's Avatar
AIRFORCEMIKE AIRFORCEMIKE is offline
Supporter
 
Join Date: Dec 2011
Location: EARTH
Posts: 4,357
Default

Originally Posted by usmceng1 View post
Nice to see you got your shaft mike. Hope it does well for you.


I did and appreciate your help and prompt response


Sent from my iPhone using Tapatalk

__________________
MINELAB CTX 3030 , EQUINOX 800-X2

Reply With Quote


  #7  
Old 06-15-2018, 10:28 AM
OzarkDetector OzarkDetector is offline
Full Member
 
Join Date: May 2018
Location: Middle of the Ozarks, Mountain Home, Arkansas USA
Posts: 100
Default

So as it turns out, there is no weight difference, (total weight), between the Anderson shaft / lower rod, and the Minelab stock three shafts / rod.
My scale reads them both at 10.5 ounces.

I too replaced the supplied Anderson cuff,
with the original one from Minelab.
It's all a pretty sweet setup.
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 03:46 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.