Friendly Metal Detecting Forums   Sunspot Scoops
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Make It or Fix It Yourself

Notices

Reply
  
Thread Tools Display Modes
  #1  
Old 05-27-2018, 09:22 PM
DoctorWhy's Avatar
DoctorWhy DoctorWhy is offline
Full Member
 
Join Date: Oct 2016
Location: Island in Penobscot Bay, Maine
Posts: 136
Default Fixing AT Pro Broken Control Box Mount

After about two-and-a-half years of heavy use, the Control Box on my Garrett AT Pro finally broke off. Both of the box's molded plastic bosses that were fastened with screws through the shaft broke off. Actually, a pretty poor engineering design...

First in-the-field fix was to wrap the box to the shaft with good old 'Gorilla Tape. It worked well but was pretty ugly. Wanting a more sturdy and 'aesthetic' fix, I did a bit of 3D drafting and came up with a design that I 3D printed.

The 3D-printed upper bracket uses the four existing screws on the housing -- just removed the screws, placed the bracket over the shaft and re-fastened those screws.

Wanting an even more secure mount, I designed two 'wedges' and another bracket. The 'wedges' were designed to fit into the cavities and around the broken-off stubs of the plastic bosses. The wedges were tapped with a 6-32 tap after 3D printing. The wedges were then secured to the bracket with 6-32 screws and the assembly glued in place with "DAP Weldwood Contact Cement"

Even though the "U" brackets are a tight fit, I also used a bit of the "DAP Weldwood" under the "U" bracket, against the shaft to prevent the box from rotating.

Since this 'fix', I now have over 8 hours of successful and happy use.

I wish there was an easy way to share the ".obj" files for anyone who would want to 3D print them. Remember, I take no responsibility for your use of this 'fix'; you are on your own...

Good Hunting!
--Bert
Attached Images
   
Reply With Quote


  #2  
Old 05-27-2018, 09:25 PM
SoOregonMd's Avatar
SoOregonMd SoOregonMd is online now
Elite Member
 
Join Date: Jan 2018
Location: Sam's Valley Southern Oregon
Posts: 1,342
Default

Excellent Job !! .. you could always zip up the obj files and put them on Drop box and share the link.I love it when a person has a need and makes it happen!

__________________
Never a Criminal.. Always an Outlaw

Reply With Quote


1 members found this post helpful.
  #3  
Old 05-29-2018, 09:28 AM
Gauntlet's Avatar
Gauntlet Gauntlet is offline
Supporter
 
Join Date: Oct 2011
Location: South of Graceland
Posts: 3,187
Default

Looks good! Break that set-up, and you have some real problems

__________________
Tesoro (Detector of the Master Race): Vaquero, DeLeon, Cibola with GB mod, and Compadre (with coil swap and 3-D mods).
Fisher: 1265X

Squad Leader: Team Cupcake

Reply With Quote


  #4  
Old 06-10-2018, 07:31 PM
RF1's Avatar
RF1 RF1 is offline
Senior Member
 
Join Date: Feb 2018
Posts: 326
Default

Well done!
Reply With Quote


  #5  
Old 06-10-2018, 07:47 PM
pan4au's Avatar
pan4au pan4au is offline
Elite Member
 
Join Date: Mar 2011
Location: W.Tn
Posts: 2,023
Default

nice repair.. you should never to do another fix there.....

__________________
Always do right; this will gratify some people and astonish the rest. Mark Twain

Reply With Quote


  #6  
Old 08-07-2018, 08:40 AM
cellrdwellr's Avatar
cellrdwellr cellrdwellr is online now
Elite Member
 
Join Date: Jul 2014
Location: Dirt Cellar, MA
Posts: 11,511
Default

Looks great! Wish I had access to 3D ptinting supplies... I ended up using close to what everyone else uses. I like the color of copper better than aluminum though. Happy hunting!
Attached Images
 

__________________
☆2018 LET'S GO CELTICS!🍀☆
☆W-207~IH-35~LC-19☆
☆Silva-62~Ster-14☆
☆Gold-1~V's-3~Buff-11☆

Reply With Quote


  #7  
Old 08-07-2018, 05:14 PM
Saltshaker's Avatar
Saltshaker Saltshaker is online now
Supporter
 
Join Date: Apr 2014
Posts: 478
Default

Great fix idea. Ive had my AT Pro for several years now. I'll have to keep this in mind if it ever happens to me. Thanks.

__________________
Modified Excal 800 w/ 8" & 10" coils & PB7 Headphones
Minelab SE Pro w/ 12X10 SEF & 6" EQ2 Excel Coil
Waterproof Explorer SE w/ 8X6 SEF & 11" DD Pro Coil
Custom AT Pro w/Remote PP & NEL Snake 3.5x6.5 Coil

Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.