So I decided to change some advanced settings in my park 1 and 2 profiles. I changed the tone on nickels and 19+ to a higher tone and 25, turned down iron to the lowest and the 1-11 and 14 or 15-18 to a lower tone. Here is where the problem comes in. I set the volume for the iron to 1, the other non ferrous trash zones down to a 5 so I could still hear them in all metal. I set the vol for the nickel and 19+ to 25. I figure the high tones would really pop. I had seen someone’s video on YouTube and followed the same basic setup.
When I went to test it I was still getting a loud report with the iron and trash zones. If the volume for these is down to a 1 I thought they would barely be audible. Am I wrong or missing something?
When I went to test it I was still getting a loud report with the iron and trash zones. If the volume for these is down to a 1 I thought they would barely be audible. Am I wrong or missing something?