pitus05081979
New Member
- Joined
- Apr 16, 2017
- Messages
- 3
Hey. I want to repair old wildcat c & g 600-1C detector. I have a problem running. I replaced the cmos series of CD 4016, CD 4024, and LM 301, LM358, electrolytic capacitors. The plug on the red wire is a sinusoidal graph, the voltmeter measured is 14.3 volts AC, the white cable is nothing. On the motherboard there are also CA 3130S operational amplifiers in round DIPs that I can not get, I do not know what else to use another operational amplifier - I suspect the CA 3130S is faulty. Does anyone have a schematic of this detector? When turned on is the lead signal, the tune potentiometer is ok. The detector reacts slightly only to large objects. I would be grateful for the help.