Which AquaSeal
- Thread starter Anthony
- Start date
dewcon
Quality Control Expert
What are you using it on..... the end cap? I just use RTV silicon there. Otherwise epoxy.
WaterWalker
Full Member
- Joined
- Apr 5, 2016
- Messages
- 239
McNett's AquaSeal and Seam Grip are urethane repair adhesives and are the same except for their viscosity (thickness). The SeamGrip is thinner and can be applied with a brush (supplied with some product packaging. The thinner Seam Grip penetrates stitching better than the thicker AquaSeal. They both can be thinned with Cotol 240. These are usually used for tent/wader repair.
https://www.amazon.com/dp/B001XUMBI...t=&hvlocphy=9007881&hvtargid=pla-323318044212
I use it on the gap between the pod and endcap. I Also seal up the little allens..let dry,.... then two dabs to hold on the black shrink wrap.
I use it on the gap between the pod and endcap. I Also seal up the little allens..let dry,.... then two dabs to hold on the black shrink wrap.
