MrNovice
Forum Supporter
But I'll ask it anyways since it has me a little puzzled....
If hunting in Pro Zero mode, iron set at 0 so you hear all the iron and nothing else is notched or discriminated out, the Iron Audio is useless right?...since you're hearing all the iron anyways? Is that correct or am I missing something about this feature?
From what I gather the iron audio button is just for use when you set the iron setting up to say 30 or 40, but need to check a target that has properties that are hitting less than that? Like a bottlecap or screw?
Also, a few other things I've noticed...the standard coil is way sensitive and barely falses if you sweep too low or slightly bump the ground while swinging. Is that pretty normal? Sens set all the way up - so I think that's normal, also a little falsing but not strong or repeatable, just chirping slightly.
I also noticed what I can best describe as a "pitch twist" type sound on penny range targets? I guess it's trying to combine the mid and high tones together on that specific range target? When I hear that tone "twist" about 77 or 78 VDI, 99% it's a penny.
And last, I get a good amount of nulling over some targets. Like either iron overload because it's too shallow or trying to relate too much info at the same time. Sometimes the screen just blanks and other times the coil has to be moved off the target and it takes like 2 seconds to reset itself. I can't say it happens often, but at least a couple times every hunt on some targets. What does that mean? Too shallow target or probably junk of some sort?
Thanks, still trying to firm up what it's trying to tell me...
If hunting in Pro Zero mode, iron set at 0 so you hear all the iron and nothing else is notched or discriminated out, the Iron Audio is useless right?...since you're hearing all the iron anyways? Is that correct or am I missing something about this feature?
From what I gather the iron audio button is just for use when you set the iron setting up to say 30 or 40, but need to check a target that has properties that are hitting less than that? Like a bottlecap or screw?
Also, a few other things I've noticed...the standard coil is way sensitive and barely falses if you sweep too low or slightly bump the ground while swinging. Is that pretty normal? Sens set all the way up - so I think that's normal, also a little falsing but not strong or repeatable, just chirping slightly.
I also noticed what I can best describe as a "pitch twist" type sound on penny range targets? I guess it's trying to combine the mid and high tones together on that specific range target? When I hear that tone "twist" about 77 or 78 VDI, 99% it's a penny.
And last, I get a good amount of nulling over some targets. Like either iron overload because it's too shallow or trying to relate too much info at the same time. Sometimes the screen just blanks and other times the coil has to be moved off the target and it takes like 2 seconds to reset itself. I can't say it happens often, but at least a couple times every hunt on some targets. What does that mean? Too shallow target or probably junk of some sort?
Thanks, still trying to firm up what it's trying to tell me...
Last edited: