Friendly Metal Detecting Forums   Big boys Hobbies
List all sponsors

Go Back   Friendly Metal Detecting Forums > Metal Detecting > Beach and Water Hunting

Reply
  
Thread Tools Display Modes
  #1  
Old 02-23-2021, 06:20 AM
dewcon's Avatar
dewcon dewcon is offline
Quality Control Expert
 
Join Date: Sep 2006
Location: Gulf, Florida
Posts: 7,924
Default Coil covers

There has been some discussion about the use of coil covers lately with the new 12" coil coming out for the Trascci MDT without one. It seems a lot has to do with the coil. Ive seen them on the Xcal and some others where you could almost see the coils near the surface and if you got coil separation you knew it quickly. This coils is made harder and im assured the cable isnt near the bottom. More like the picture here i thought id show of an Eric Foster provided to my by a friend. I dont think id seen a coil cut in half before. Apparently you can now order the coils .... got mine coming thru Thomas Dankowski here in Fl who is now testing it. Im sure he will put something up once hes done.
Attached Images
 

__________________
MDT 8000, EQ800 CTX Blue Xcals

Dew Meeker

Reply With Quote


  #2  
Old 02-23-2021, 10:53 AM
basstrackerman's Avatar
basstrackerman basstrackerman is offline
Elite Member
 
Join Date: Jan 2006
Location: Alabama
Posts: 868
Default

Yeah I've never used coil covers and have never worn any coils out. The equinox has the sharp lips that hold cover on and in grass you really could not go without a cover due to the sharp edges digging in. But I fixed that issue recently.

__________________
Retired to southern Alabama. Bill

Reply With Quote


  #3  
Old 02-23-2021, 12:19 PM
KOB KOB is offline
Supporter
 
Join Date: Mar 2019
Posts: 2,536
Default

This is what I've mentioned all along. Perfect picture. Now , take that cable and box that out into 1/4 of what it is now. Couldn't a coil be made much lighter , narrower , etc ? Why so much insulation ? I'm not a coil engineer , but does this make sense to you guys ?
Reply With Quote


1 members found this post helpful.
  #4  
Old 02-23-2021, 12:43 PM
FelixtheCat's Avatar
FelixtheCat FelixtheCat is online now
A Knight of the Round Coil
 
Join Date: Apr 2006
Location: Miami
Posts: 11,556
Default

What I'd like to see is a coil designed more hydrodynamically (aerodynamically) to cut trough the water with the least amount of resistance. A thinner/narrower coil like KOB suggests with this improvement would be great. I guess the cross section would probably look like an oval.

__________________
SEEK & YOU SHALL FIND!
Founding Member of RingKeepers - A For-Profit Organization!
"THE CURE FOR ANYTHING IS SALT WATER. SWEAT, TEARS OR THE SEA" - Isak Dinesen

Reply With Quote


1 members found this post helpful.
Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.