Good example of etrac in iron

Flyingeagle · Jul 23, 2017

So I got out today for about an hour and a half to an old heavy hunted park, over the years I've been hitting on and off for 25 years. Pretty trashy so i tried a heavily discriminated pattern. Had a good sounding signal but was reading 28-38ish was 6-7 inches decided to dig and first thing was a nail, I thought to myself that can't be it, sounded to good. Checked the hole again and there it was at the bottom. So it appears the nail was actually above the 1859 Indian head. This is why I bought the etrac for situations like this. Thanks for looking

metaladdict · Jul 23, 2017

This is another reason I would like an e trac.

cellrdwellr · Jul 23, 2017

Great find! Love FBS! HH

Tom_in_CA · Jul 23, 2017

nice play-by-play. Great pix. I love the green patina on the IH !

Captain Silver · Jul 23, 2017

FBS machines can hunt in the iron no doubt...congrats on the Fatty Indian!

Flyingeagle · Jul 23, 2017

Thanks, Actually after I took the picture I found 2 more nails in the hole.

Tom_in_CA · Jul 23, 2017

While there are certainly machines that are better at iron-see-through (like 2-filter tesoros), yet the explorer series (II, etrac, etc...) can actually hold their own . CONSIDERING the power-house that they are.

Good example of etrac in iron

Flyingeagle

New Member

Attachments

metaladdict

Elite Member

cellrdwellr

Elite Member

Tom_in_CA

Elite Member

Captain Silver

Elite Member

Flyingeagle

New Member

Tom_in_CA

Elite Member

Similar threads