juit
Elite Member
- Joined
- Mar 25, 2017
- Messages
- 810
Ok guys got this fisher metal detector
came with some work to do:
broken discrimination pot
screen needle does not work
broken coil shaft
broken tightener near the handle
currently my tech guy "old school electrician" that helps me fix & mod my paintball markers is looking on how to fix the control box
I have been working on the shaft stuf
this is how I fix the tightener that was split in half
I glued back together with J B Weld and left it for a day to cure
then I cut a canal with my dremel and put a zip tie Im thinking of using a second one but I only had this heavy duty one
since the lower shaft was messed up I found a plastic whites coil shaft
the only problem is that the cz have the shaft with a vertical bottom hole and the whites is a horizontal holes
sooo I drilled a horizontal hole so all the bottom holes are moved the to the side
I started with a small drill bit and move to bigger ones
repaired and adapted rod
hip mount from walmart
DIY heavy duty coil protector
Ill post updated later on about the control box
came with some work to do:
broken discrimination pot
screen needle does not work
broken coil shaft
broken tightener near the handle
currently my tech guy "old school electrician" that helps me fix & mod my paintball markers is looking on how to fix the control box
I have been working on the shaft stuf
this is how I fix the tightener that was split in half
I glued back together with J B Weld and left it for a day to cure
then I cut a canal with my dremel and put a zip tie Im thinking of using a second one but I only had this heavy duty one
since the lower shaft was messed up I found a plastic whites coil shaft
the only problem is that the cz have the shaft with a vertical bottom hole and the whites is a horizontal holes
sooo I drilled a horizontal hole so all the bottom holes are moved the to the side
I started with a small drill bit and move to bigger ones
repaired and adapted rod
hip mount from walmart
DIY heavy duty coil protector
Ill post updated later on about the control box
Last edited: