Pin Point mod parts (LIST) for the Excalibur

Got a few asking me to share a list of what is needed. I did one a few years ago but can't remember where so here is another.

https://www.allelectronics.com/item/...der-.10/1.html
White 2 pin connector


https://www.mouser.com/ProductDetail/Heyco/3237/?qs=wRLls4Gs8BDGZ3e68gV4QQ==
Heyco pigtail water tight fitting




Bike Bar ends...any bike shop will have these also..

https://www.amazon.com/Alloy-Chrome...e-bin:4827849011&s=outdoor-recreation&sr=1-40

https://www.amazon.com/Diamondback-...ocphy=9007881&hvtargid=pla-581277927798&psc=1
Grip...same here any bike shop or walmart


https://www.digikey.com/products/en?...on=on&x=6&y=19
this is the toggle I used for years, good if you like to hunt in both PP and disc...very dependable, just epoxy the 4 small rivits on top for best results, protect.


https://www.mcmaster.com/9936K16/
cable 2 lead


https://www.mcmaster.com/92605A113/
think this is the small allens that hold the endcap in


https://www.mcmaster.com/7856K221/
this is the black shrink wrap ..can be cut to fit then used...4 feet take note


https://www.homedepot.com/p/J-B-Weld...240H/310832218
Epoxy


https://www.mouser.com/ProductDetail...rrencycode=USD
the yellow push button which I use only now


https://www.mouser.com/ProductDetail...rrencycode=USD
4 pin fitting if you want to make the handle removable..female

https://www.mouser.com/ProductDetail...rrencycode=USD
4 pin male fitting to mate to the above

VIDEO OF

https://www.youtube.com/watch?v=WrhG4xgE5mc&feature=emb_logo