Friendly Metal Detecting Forums   Myers Depot Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Advice on Detector Purchase

 
  
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-14-2022, 11:22 AM
HistoryStudent's Avatar
HistoryStudent HistoryStudent is offline
Senior Member
 
Join Date: Feb 2015
Location: Bellevue, Wa
Posts: 438
Default Newbie to pulse induction detecting

I'm not new to metal detecting but I've never used a pulse induction detector. I bought a Golden Mask Mobile ST which will arrive tomorrow. I bought it to look for military relics at a decommissioned army base where I know for certain there are things like collar disks, medals and hat pins that can be at least as deep as two feet and maybe more - including spot dumps where they dug a hole and threw in buttons or marksmanship badges or medals.

My first question, without ever having used a PI detector, is about coil sizes. I will have three different sized coils: 7, 11 and 16 inch. Does a PI detector see deeper with the same size coil than a VLF detector on something like a brass collar disk or a silver quarter? Or does it face the same basic depth limitations as the VLF machines based on coil size? The soil will be somewhat mineralized due to the amount of rust iron nails of different sizes.

I'm sure that I'll have more questions later but that is my first for now. Thank you for your help.

Sent from my SM-G998U1 using Tapatalk

__________________
Garrett: Ace 350, AT Pro
Teknetics: T2 Ldt SE (2017 version)
Tesoro: Golden uMax (old tones), Eldorado uMax and Silver Sabre uMax
Golden Mask 4wd

Reply With Quote


 


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 01:46 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.