debaroo
New Member
Hey, does anybody out there have one of the Land Rangers (not PRO model) from 2000-2009? They are slightly different than the Land Ranger (not PRO) from 2009 - about 2012 or so. There is a button on the touchpad called "PRESET" and the newer model had a button in the same place called "PROGRAM". I spent several weeks reviewing the only manual I could find for the Land Ranger, and finally called the manufacturer and they said there were 2 Land Ranger models (neither of which was a PRO) made from 2000-2012, and they emailed me the manual for the older model. I need help. I'm very new at metal detecting, and getting frustrated because the unit still doesn't seem to function like the instructions say. For example, the instructions say to start detecting, hold the metal detector at waist level, turn it on, and it will first display a code designated as "AR", which is air sensing...then the manual says it will go to a code "Ir", then to lower it and it will show a code for ground balancing, "gb". It never ever goes to Ir--it immediately goes to "gb". So I don't know if the instructions are wrong, if I'm doing something wrong, or if the metal detector is defective. Can anybody help?