Friendly Metal Detecting Forums   Myers Depot Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Make It or Fix It Yourself

Thread Tools Display Modes
Old 07-10-2019, 08:34 PM
TreasureHawk's Avatar
TreasureHawk TreasureHawk is offline
Junior Member
Join Date: Apr 2012
Location: The world!
Posts: 65
Default Bounty Hunter Land Ranger Pro Ground Balance Modification

Ground Balance Switch Modification

This modification corrects an intermittent problem with defective ground balance switch on the Bounty Hunter Land Ranger Pro metal detectors.

Recently, I was having issues with the ground balance front panel membrane switch on the Bounty Hunter Land Ranger Pro.
The switch was not always working properly and would not properly start the ground balancing. It was intermittent at best, and was just not working as it should.

On my previous "pin point" mod Bounty Hunter Land Ranger Pro Pinpoint,
I installed two different switches for pin pointing.

To correct the intermittent/defective ground balance original front panel membrane switch, I disconnected the "Green" switch I originally used and hooked the "Green"
push button switch to the circuit board as shown in the pictures. Now the green push button switch is exclusively used for ground balancing.

It works awesome now. Solder "Green" switch to areas that are marked in red.

I hope this helps others. Please see my previous mod for more information and pictures
Attached Images

Whites Eagle Spectrum
Bounty Hunter Land Ranger Pro
Grayslake, IL

Reply With Quote

Old 07-14-2019, 06:38 PM
Saoirse's Avatar
Saoirse Saoirse is offline
Join Date: Sep 2016
Posts: 1,391

Thatís some A grade tinkering! Nice job!

AT Pro | Nokta Impact

Reply With Quote


ground balance, ground balance issue, land ranger pro, modification

Thread Tools
Display Modes

Forum Jump

All times are GMT -4. The time now is 12:58 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.