Friendly Metal Detecting Forums   Kellyco Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Metal Detecting > General Hobby Discussion

Reply
  
Thread Tools Display Modes
  #1  
Old 04-24-2013, 02:34 AM
shegeek72 shegeek72 is offline
New Member
 
Join Date: Mar 2013
Posts: 18
Default Detecting tips & tricks

Some good tips & tricks. I have a question about #7:

"Don't coil the cable from the control box down to the search coil. Instead, tape the cable in a single line up the shaft to a point above the collapsible joint. Start the coil from there. As you swing the coil from side to side, a loose cable coiled around the shaft, and near the search coil, can give false signals."

Any truth to this? All of the MDs I've seen have it coiled all the way to the coil. I just checked my 250 and there's no slop near the coil.

http://www.goldfeverprospecting.com/medetitr.html
Reply With Quote


  #2  
Old 04-24-2013, 02:39 AM
OZARKS OZARKS is offline
Banned
 
Join Date: Jul 2011
Location: Ozark Mts
Posts: 4,996
Default

It's probably more of a personal choice, as long as you have enough slack near the coil to allow you to adjust the coil if need be, then it's fine.

Almost every experienced detectorist that I have seen wraps the wire around the detector's shaft.

I personally wrap my coil wire because I have found that it doesn't get snagged by sticks and brush when I am woods hunting.
Reply With Quote


  #3  
Old 04-24-2013, 10:41 AM
Terry Soloman Terry Soloman is offline
Elite Member
 
Join Date: May 2011
Location: White Plains, NY and Congress, AZ
Posts: 6,049
Default

The less wire you have near the coil, the better your depth and sensitivity. It also cuts down on EMI. Not personal preference, but fact.
Attached Images
 
Reply With Quote


  #4  
Old 07-14-2013, 10:14 PM
Uhunter Uhunter is offline
Junior Member
 
Join Date: Jun 2013
Posts: 30
Default

I have always subconsciously did exactly that!
Straightening it from the coil to bout two feet up.
I dunno how to explain why i know how to do it, just from using it so long you kinda know when somethings messing with it... not false signals just a performance difference

some serious 6th sense stuff
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Just ordered at pro looking for any tips or tricks Msdigger General Hobby Discussion 14 12-06-2013 11:44 PM
Tot lot tips and tricks/grids? DetectorOCD How to Use Your Metal Detector 8 07-17-2013 10:14 PM
MInelab 305 Tips/Tricks ? VTACE250 All About Detectors 3 05-01-2013 01:11 AM
Excal tricks and tips? zeemang How to Use Your Metal Detector 1 05-16-2012 06:49 PM
New to detecting - Tesoro tiger shark - tips n tricks? iflyinmymind How to Use Your Metal Detector 2 08-22-2011 03:40 PM


All times are GMT -4. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.