Ordered Mal's Surfone kit for the Excalibur and also his Surfones. Installed the kit in about 15 minutes. The longest wait is overnight for the AquaSeal to dry. After that I cleaned and re-shrunk the old end cap and it was done. Mal supplies 2 heat shrink wraps for the end cap but I decided to save them. Took the detector to the beach and it was a world of difference. First the headphones are now interchangeable, I have a 3 1/2 foot cord instead of the short 19" cord that Minelabs uses and I have headphones that sound much better and don't fall off my head.
Malcolm you did a great job on this upgrade!
BTW Malcolm is always available should you have any questions about doing this. Anyone can do it! You just need an allen wrench to remove the end cap screws, some AquaSeal and a heat gun to shrink the end cap on.
This upgrade was money well spent in my opinion!
Malcolm you did a great job on this upgrade!
BTW Malcolm is always available should you have any questions about doing this. Anyone can do it! You just need an allen wrench to remove the end cap screws, some AquaSeal and a heat gun to shrink the end cap on.
This upgrade was money well spent in my opinion!