• Forum server maintanace Friday night.(around 7PM Centeral time)
    Website will be off line for a short while.

    You may need to log out, log back in after we're back online.

Makro Kruzer 19Khz Testing and The Final Word

Fivepin

Elite Member
Joined
Oct 24, 2016
Messages
535
Location
Northern Ontario, Canada
Lets try 19khz somewhere the Kruzer has already pounded. Can we pull more out of a spot that has been beat to death, and then beat again by the Kruzer in 14khz mode. Short answer yes. Yes you can! We also see the Kruzer's imitation of a Canadian Goose. Its a pretty good one too. As always we'll have fun. Even as I trick you into learning...

https://youtu.be/EPGsIsQ3J18
 

Attachments

  • 1.jpg
    1.jpg
    97.3 KB · Views: 237
Lets try 19khz somewhere the Kruzer has already pounded. Can we pull more out of a spot that has been beat to death, and then beat again by the Kruzer in 14khz mode. Short answer yes. Yes you can! We also see the Kruzer's imitation of a Canadian Goose. Its a pretty good one too. As always we'll have fun. Even as I trick you into learning...

https://youtu.be/EPGsIsQ3J18

The Nokta Impact when 20khz is utilized can hunt behind using 14khz.
In iron it works real good.

Thanks for sharing.
 
Yessiree, it'll find little itty bitty stuff.
Once you spend some more time with it
you'll be able to tell the tiny targets, audio
is real clipped on the tiny targets.

In learning the machine I was blown away at the
depth it will pick up little stuff like air gun pellets
and shot from shotgun rounds.

Thanks for sharing the vid and hope you enjoy the Kruzer!
 
The higher freq can alert on some coins better too. Even silver.

The use of higher frequency in a polluted site may turn signals (coil swept at 14khz) when using 20khz to better signals or longer signals.
 
Back
Top Bottom