palmettoguy
Senior Member
I picked up a used Vaquero and it seems to be working just fine but I am having one issue...when I cut a plug and flip it and sweep over the hole and plug, I don't get any hits on the detector...meaning the target has now vanished.
The plug is only 6" long when flipped...surely the Vaquero can still detect it even if it's at the very bottom (top) of the plug when flipped.
I've GB per instructions and run sensitivity at 10 using the stock 9x8 coil.
Everytime this happened the target was only 1-2" from the top of the plug or rather 4-5" away from the coil sweeping over it when flipped.
It air tests fine...a quarter at 8" with no probs.
Any suggestions or advice?
Thanks in advance!
The plug is only 6" long when flipped...surely the Vaquero can still detect it even if it's at the very bottom (top) of the plug when flipped.
I've GB per instructions and run sensitivity at 10 using the stock 9x8 coil.
Everytime this happened the target was only 1-2" from the top of the plug or rather 4-5" away from the coil sweeping over it when flipped.
It air tests fine...a quarter at 8" with no probs.
Any suggestions or advice?
Thanks in advance!