• Forum server maintanace Friday night.(around 7PM Centeral time)
    Website will be off line for a short while.

    You may need to log out, log back in after we're back online.

Headhunter Pulse board pic or info needed

flphil

Forum Sponsor
Joined
Jul 15, 2011
Messages
1,338
Location
Tampa
I have a DetectorPro Headhunter Pulse with 2 wires detached (White & red) it appears they get soldered to the board were coil is printed. Need info or pic for what color goes where. Also if it works I am going to need a coil for it in the near future. Thanks, phil headhunter pulse.jpg
 
Phil, if you are sure its the coil wires then it shouldn't make a difference which color goes where as it is a mono-coil. ;)

Or you can try it out both ways and see which you like best. It won't damage the machine (unless you are heavy handed with the soldering iron).
 
Back
Top Bottom