• Forum server maintanace Friday night.(around 7PM Centeral time)
    Website will be off line for a short while.

    You may need to log out, log back in after we're back online.

Whites Bullseye II Pinpointer Feature Unknown

MR MOJO RISIN

Junior Member
Joined
May 10, 2007
Messages
37
Location
Connersville, IN
:?: Anyone know why the Bullseye PP II has a sensitivity notch where half way around it does this loud continuos annoying beep, when not near metal? I do know their is the vibrating option, however I'd like to know if this is a normal function.
 
The sensitivity notch is so that you can get the max depth while pinpointing. Take the pinpointer hold it to the ground you are mding turn it up until it just goes off with no metal in the ground and then turn it down so that it just stops vibrating/buzzing this way it is more sensitive to metal in the ground but the ground itself wont set it off.
 
:duh: Thanks, that makes since. But why would'nt they just put Max and Min?
Their advertisement does say, "No adjustments needed, just push the button"
Therefore I thought I had a defective product.
 
Back
Top Bottom