71duster
Full Member
Ok I'm still very new with the ATP but learning curve not as bad as I thought, but have couple Q's for you ATP guys. First off when Im at older parks where the gravel trails change and is now dirt and grass lawn area the depth reads different (I realize just an approx depth) but get a nice sounding tone look at face, it reads 82 83 at bout 6 in get through the grass and clay, bout 6in then hit old gravel walk dig another 4-5in more then get coin (dime) is this normal or do i have something set wrong???Other thing, I was swinging and realized i was running late and thought ok one more find and I'll leave. 3 plugs & 40min later I was thinking dang I am Really late now(I'm sure Im the only one to ever do that, yea right) anyway I boogied up the hill, with the ATP still on chirping all the way. half way up I hear a nice high tone, half paying attention i look down and it looked like it was giving pinpoint reading PP, thought that was weird so I ran back over it to see if it would do same thing, it did but then I realized it wasnt PP it was 99. like i said i was in hurry and usually when I get a steady number it will bounce down one number once in a while,, this would not come off 99, anyway jumped in Jeep and left (im going back tomorrow) figured I'd ask you guys before i head back is it just cause my settings are wrong (to hot) iron at 37 sensitivity, 2 bars from top or is it simply a good signal (never moved off 99) thanks guys and sorry such a long post