Hello all,
Ground finally thawed and was able to get out with my brand spankin new deus with the 9 inch coil (still running version 3.2 and waiting for my MI-6 to ship).
Two hunts at a abandoned school yard.
First trip was running deus fast. Managed 2 wheat pennies in one hole, a nickel, and a ton of tin, iron and can slaw.
Second trip I plugged in calabash's relic program with full tones. I really like the chatter and let me tell ya, this place is loaded with trash. Every swing is getting 5-10 tones. I managed 4 wheat pennies, two beer cans, less tin, and one old button with no distinguished marks.
Here is my question. I can clearly pick out the sound of a wheat penny. is silver/clad gonna sound much different? Perhaps its all been picked out, but i would think i would get something.
i guess i am questioning whether I am listening for the right sounds for silver
Thanks in advance
Alright,
What will silver sound like??
It will depend on a few things.
For super heavy mask it could read a very low midttone,,with TID even reading below disc level,,,this here I'm referring to,,probably left until a Deus user has more time under their belt.
Next, if silver is not too deep,,it will read correct VDI/TID with tone that is matched (assigned) to the tone you have programmed to the actual vdi displayed.
If silver is deeper,,,it will respond tone wise to whatever ever tone you have assigned to the 90s plus TID reading.
User might see 98 for example in the window,,,this is not a true vdi reading,,just call it a reference.
Deeper silver very likely to give just a smidge of horseshoe shading,,indicating a weaker signal (deeper target.
Now,,these kinds of singals,,,can be anything nonferrous besides silver,,,could be copper,,a nickel,,even a deep pull tab,,even deep can slaw.
Can also occassionally be a deep bent nail,,fence steeple.
All frequencies used with Deus are capable of hitting deep silver and copper,,but 12khz based on my experiences is usually the deepest on nickels.
User needs to remember a few things when looking for deep silver coins.
Depending on ground minerals,,medium mineralized ground needs a good gB,,not run at 90.
User if they depend on 12 and especially 18khz freqs,,Deus is more liables to hit deeper on smaller nonferrous things like smaller can slaw, etc,,and if deep enough,,,can throw these junk targets into the higher TID range with higher tone(if assigned to this region) to boot.
Running 8khz this tendency here not so likely to happen as much.
Users of Deus should remember how truthful the Deus is at providing vdi/TID depends on a few things,,,like ground mineral levels,,size and conductivity of target,,,frequency as it relates to target conductivity,,reactivity setting,,,higher reacivity settings like 3 plus using version 3.2 will cause Deus to drive shallower targets (nonferrous) into the high side tone wise. Silencer setting,,I recommend learning Deus with silencer always set at -1,, to get the deeper stuff.
Using version 3.2,, deep copper coins and silver,,will have a smoother lighter sounding tone,,not full fledged like mid depth copper and silver.
Audio report I highly recommend at level 5 or 6 here to give a user best chance to hear deeper targets.
Horseshoe shading will give clues along with the tone mentioned above.
Coins mixed with iron,,can report both textbook and can have slightly broken tone,,even some static.
Some folks don't believe or realize how deep the Deus can strike coins,,one of the reasons why is due to the tone and TID provided.
Using notch appropriately can help a person dissect sites with modern trash,,along with correct reactivity/freq/silencer setting,,,and appropriate coil sweep speed.
Lifting Deus coil can expose some bigger items like mediums sized can slaw,,and cans, etc.
Using mutil tone with Deus,,,my recommmendation use 3 tone,,,keep things simple,,,4 and 5 tones is way too many.
Full tones can be used in trashy sites,,,some notch appropriately placed can help,,,nickels here though can be missed.
Couple little tricks/tips here when hunting trashy sites.
Horseshoe meter,,,does it agree with tone strength provided???
Is it strong tone,,with a lot of horseshoe shaded,,,this would indicate better chance of true vdi on target reported.
On targets where horseshoe indicates mid depth and slightly deeper in trashy sites,,,how good and consistent is the tone,,,what happens to signal as you walk around it,,TID too,,how steady.
Any iron tone being reported trying to roll in real quick??
You see your real job in trashy sites,,is to determine how truthful Deus is being to you.
If you think it is lying to you,,good target to dig if mid depths.
If you think Deus is telling the truth,,but the vdi reported doesn't match most coin ID,,pass on it.
Now user trying to mange to find gold jewelry,,,you are SOL here,,,just like you would be using any other detector,,,except,,Deus is capable of alerting on smaller gold coins and jewelry deeper than a lot of detectors out there.
Users of Deus can pull deep coins without hearing tones on a lot of shallow and mid depths junk targets running high notch,,,I actually recommend this to new users of Deus.
Users need to familiarize themselves using the expert tab under notch to apply.
For example,,user can select 12khz and a notch setting of 0-72,, and have a quieterer hunt,,yet can still hit some deeper finds,,even deep nickels.
Not to insult anyone's intelligence here.
Good Deus user,,needs to develop a regiment for checking targets.
Like first is size,,is target too big to be coin??? If yes move one.
Is tone provided strength wise congruent to horse shoe shading.
How smooth is tone,,,how does the meter respond when sweeping and walking COMPLETELY around target,,,does target have tendency to rise and stay pretty steady.
Deus user needs to be ablel to also recognize mid conductive targets,,some of these very good finds.
Deus user can change reactivity up or down to check a target to see affects.
Deus user can change freq to see affects,,just remember higher freqs give better unmasking capabilities,,,for example if you find a target using 18khz,,and when you switch to 8 kHz and it disappears completely good chance of heavily masked target,,,even switching to 12 kHz from 18khz can indicate heavily mask target,,,this is especially good to do if you hear iron using iron tone or full tones while running low disc like 0.