Friendly Metal Detecting Forums   Quality Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Metal Detector Accessories

Reply
  
Thread Tools Display Modes
  #1  
Old 01-05-2017, 05:08 PM
choppadude's Avatar
choppadude choppadude is offline
Supporter
 
Join Date: Dec 2012
Location: Twin Tiers N.Y.
Posts: 3,663
Default Mars MD Universal shaft

These caught my eye when they first came out solely because I already owned a Deus and the though of being able to set my other units up in the same fashioned appealed to me.
Now the only complaint I have heard about this set up is it requires you to "trim" the mounting post on your AT Pro/Ace series units. I am not positive but believe you may have to also do some modifications to fit a Whites unit to these shafts.
Regardless it was perfectly set for the unit I was using it for.

I purchased a AKA Sorex Pro detector from a forum sponsor. The unit is made in Russia and is a very nice detector with many features and settings that I have only begun to explore. The one thing that I did not like was the lower rod assembly. It has the same twist style clamp many units use such as the AT Pro, but it does not securely fix the lower shaft. I remedied this by applying 2 wraps of electrical tape around the shaft. Not my idea of a good fix but it was OK. The rest of the shaft seemed decent but I have never been a big fan of the S style shafts.

The Mars unit is set so that an AKA model head unit snaps right on as is. Just unsnap from stock rod and snap om Mar MD rod. Easily done in 5 seconds.
Then just affix the correct washers (unit comes with a ton of different size rubber washers) coil and bolt assembly, run the wire up the shaft and connect coil. That's it, ready to detect.
Another thing I like is the shaft locking mechanisms have a replaceable rubber pad that locks down the shaft. They also supply extra rubber pads!
This unit feels a little heavier than the Deus rod assembly but also feels a lot beefier in the handle section.
I paid $120 delivered for my assembly from eBay and I believe it is worth every penny.



__________________
XP Deus, CTX 3030, F75 LTD2, AT Pro, Teknetics T2 Classic, AKA Sorex Pro, Racer2, Minelab GP3500

Reply With Quote


  #2  
Old 01-05-2017, 05:15 PM
tnsharpshooter tnsharpshooter is offline
Elite Member
 
Join Date: Jan 2015
Location: Middle TN
Posts: 4,314
Default

I like it Choppa,,,,S-rods and me don't mesh well.

__________________
Minelab CTX, Minelab XS Explorer, Xp Deus, Blisstool V6, Minelab GPX 4500, Aka Signum, Nokta Impact, Nokta Relic

Reply With Quote


  #3  
Old 01-07-2017, 08:09 AM
Big Treble's Avatar
Big Treble Big Treble is offline
Supporter
 
Join Date: Dec 2011
Location: SW WI
Posts: 2,870
Default

This is pretty cool thanks for sharing.

For me it would only work for the ATPro, which I don't really use anymore, but I'd get one for that in a heartbeat, just the increased storage ability is cool enough on its own.

__________________
E-Trac, Spectra V3i, ATPro----Most days I'm not sure if I'm a Metal Detectorist, or a Scrap Metal Relocation Engineer.
Big Treble Outdoors Treasure Adventures -Missing big silver & anything remotely valuable since 2010.

Reply With Quote


  #4  
Old 01-07-2017, 08:52 AM
woodbutcher's Avatar
woodbutcher woodbutcher is offline
Elite Member
 
Join Date: Jan 2014
Location: Indiana county, Pennsylvania
Posts: 2,657
Default

Nice rod,I was looking at them awhile back too,seems like a well built rod
Reply With Quote


Reply


Thread Tools
Display Modes

Forum Jump


All times are GMT -4. The time now is 01:10 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.