hillbillydigger
Elite Member
Thanks for the advise. I'm doing just fine with the detector now that I am in my 3rd month of detecting. The main problem now is it rains 3-4 times a week for past 3 months, so I can't get enough digging time in!
Hopefully this will help you learn the f2 in trashy or multibull signal areas. First thing is to disc iron out by using the plus button and it will no longer sound for iron. Start to swing about a 3 foot area back and forth looking for the highest repeatable number. Don't worry about the other numbers just the high one. Now use disc and eliminate every thing below the high signal. You should be able to center that signal now really easy. Hold the pin point untill you get the loudest tone and lowest number. Move side to side and back and forth. Your target should be just ahead of where the shaft connects to the coil.After you get the target then disc in the next symbol below your last target and sweep again. this way should get you every target with ease.I rarely lower the sens, if anything i.ll max it and depend on useing disc to seperate targets. The f2 is a great MD and soon you'll be pulling coins and good stuff. Hope this helps, if not send me a pm and maybe we can get in touch and i can help you
I just got a F2 and am learning to use it.First thing is to disc iron out by using the plus button and it will no longer sound for iron.
Start to swing about a 3 foot area back and forth looking for the highest repeatable number. Don't worry about the other numbers just the high one. Now use disc and eliminate every thing below the high signal.