Headhunter Pulse board pic or info needed

flphil · Oct 15, 2013

I have a DetectorPro Headhunter Pulse with 2 wires detached (White & red) it appears they get soldered to the board were coil is printed. Need info or pic for what color goes where. Also if it works I am going to need a coil for it in the near future. Thanks, phil

Rudy · Oct 15, 2013

Phil, if you are sure its the coil wires then it shouldn't make a difference which color goes where as it is a mono-coil.

Or you can try it out both ways and see which you like best. It won't damage the machine (unless you are heavy handed with the soldering iron).

flphil · Oct 15, 2013

Rudy, Thanks your right it works either way. HH phil

Rudy · Oct 15, 2013

flphil said:
Rudy, Thanks your right it works either way. HH phil

Glad to be of help.

Headhunter Pulse board pic or info needed

flphil

Rudy

flphil

Rudy

Similar threads