Friendly Metal Detecting Forums   Hollands Brook Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Detectors and Gear > Advice on Detector Purchase

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-27-2008, 05:35 AM
ZR Ranger ZR Ranger is offline
New Member
 
Join Date: Jul 2008
Location: Nonthaburi
Posts: 19
Smile Coils

Dear all.

I have finally decided what metal detector I will try to purchase but I have a practical question for you all.

What's the difference between the coils?
Do different types have different alloys inside?
I will detect a lot on the beach and since here in Thailand most of the beaches are beautiful white beaches, what kind of coil would you recommand and why?

thanks for your help
Reply With Quote


  #2  
Old 07-27-2008, 10:50 AM
GeorgiaJay's Avatar
GeorgiaJay GeorgiaJay is offline
Elite Member
 
Join Date: Jun 2008
Location: Noth Atlanta, GA
Posts: 585
Post re:coils

Quote:
Originally Posted by ZR Ranger View Post
Dear all.

I have finally decided what metal detector I will try to purchase but I have a practical question for you all.

What's the difference between the coils?
Do different types have different alloys inside?
I will detect a lot on the beach and since here in Thailand most of the beaches are beautiful white beaches, what kind of coil would you recommand and why?

thanks for your help
Reference: http://www.treasurefinders.net/types_of_coils.html

*Written by SkiWhiz*- (this helped me to understand different types of coils)
I found this on the web doing some research and thought that I would pass it along to you all.

Types of Coils
Some of the basic coil types:

The most common description for metal detector coils are: concentric, elliptical, and Double D.

Concentric Coil
A concentric coil is probably the most commonly used coil. Different manufacturers refer to these coils with different names, however a concentric coil is a concentric coil! These coils are round, some being very thin in height, some thicker, some with open holes in the center, making them shaped like a flattened donut, and some are solid. A few of the manufacturers have migrated into designing their concentric coils into a design which has caused them to be referred to as “spider coils” because the bracing of the coil’s structure makes the overall appearance of the coil to resemble a spider’s web.

Elliptical Coil
This style of coil also gets its name from the shape of the coil. Instead of the round shape of the concentric coil, it is merely has elliptical shape. Now if the coils are different only in shape, you are probably thinking why would one want to buy an elliptical coil over the concentric coil?


Let’s assume we have a 8”concentric coil (or round coil). Let’s also assume that the coil covers a path of 8” wide each time the coil is passed over the ground in the sweeping motion. Now, let us also assume the coil weighs 12 ounces.

By making the coil less in width and longer in length the coil will become elliptical in shape. Lets suppose the 8” concentric coil mentioned above were to be reshaped by decreasing its width by one inch and increasing the length of the coil by 1”. The coil would be elliptical in design, and would be, let’s say, a 9” x 7” coil. By doing so, the coil has increased the amount of ground it will cover per sweep of the coil by one inch. We have thus an elliptical coil with the same size windings as was in the 8” concentric coil, and the same weight as the 8” concentric coil, but have a bonus of 1” more ground cover per sweep. Had the coil width been decreased by 2”, the length could have been increased by 2”, making the coil an elliptical 10” x “6” coil, thus creating a coil with two inches more ground coverage per sweep of the coil, with the same overall weight of the 8” coil. (The quoted measurements of the coil were just for an illustration, not exact measurements.)
The major advantage of the coil is the ground coverage versus the weight, the major disadvantage is that it usually takes a little more getting accustomed to the coil to achieve the precise pinpointing of the target as compared to the concentric style.

Concentric Spider Coil
A concentric spider coil has the same windings features as the concentric coil mentioned previously. The major difference between the two is appearance. However, it is my personal opinion that the spider coils seem to be a little more sturdier, and when bumping the coil into small twigs and objects while in the woods relic hunting, the amount of false signals are quite a few less than the normal concentric coil.

Double D Coil
The Double D coil is a coil which has the winding in the shape of the letter D. Normal winding are basically shaped the same as the shape of the coil from overhead, for example concentric coils have windings which are also round. Elliptical coils have windings which are also elliptical or oblong. Double D coils have windings shaped as the letter "D" placed back to back.
Double D coils for the most part are not as deep seeking as the other coils, but enables a wider scanning of the ground per sweep of the coil, and also offers the bonus of not being effected as badly by heavy ground mineralization.

I hope this helps! GL and HH

__________________
Ace 250 w/ Sniper Coil, Vibra-Probe 570

Reply With Quote


  #3  
Old 07-27-2008, 11:15 AM
GeorgiaJay's Avatar
GeorgiaJay GeorgiaJay is offline
Elite Member
 
Join Date: Jun 2008
Location: Noth Atlanta, GA
Posts: 585
Default

Also, you might want to read these two links. They are very helpful! These links explain the different types of metal detectors, such as VLF (or Very Low Frequency), PI (or Pulse Induction), BFO (Beat-Frequency Oscillation), and TR ( or Transmit/Receive).

http://metaldetectorreviews.net/

http://support.radioshack.com/suppor...tdet-2.htm#BFO

__________________
Ace 250 w/ Sniper Coil, Vibra-Probe 570


Last edited by GeorgiaJay; 07-27-2008 at 11:18 AM. Reason: link broken
Reply With Quote


  #4  
Old 07-27-2008, 09:26 PM
Boris's Avatar
Boris Boris is offline
Junior Member
 
Join Date: May 2008
Location: Southwest Michigan
Posts: 92
Default Coils

There is a lot of good info for you to read in the previous posts I just would like to add that in the Minelab X-terra line of machines the size shape and frequency changes with the coill choices. Just a little more info ty
Reply With Quote


  #5  
Old 07-28-2008, 04:28 AM
ZR Ranger ZR Ranger is offline
New Member
 
Join Date: Jul 2008
Location: Nonthaburi
Posts: 19
Default

Thanks for the effort GeorgiaJay and Boris. It's much appreciated.
Reply With Quote


  #6  
Old 08-02-2008, 11:11 AM
RickO's Avatar
RickO RickO is offline
Elite Member
 
Join Date: Apr 2008
Location: NYS-Catskill Mountains
Posts: 20,344
Default

Great assemblage of information... that is what helps to make this forum so great.... good, informative answers to questions. RickO
Reply With Quote


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DD coils or round coils? Which do you guys prefer and why. Ty TN_INDIAN All About Detectors 95 01-18-2013 11:02 PM
EXcelerator coils Vs. Whites coils Rustifer Metal Detector Accessories 1 03-06-2010 04:32 PM


All times are GMT -4. The time now is 03:55 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.