Friendly Metal Detecting Forums   NWI Metal Detectors
List all sponsors

Go Back   Friendly Metal Detecting Forums > Metal Detecting > Beach and Water Hunting
Reload this Page 1912 Barber Dime
Register iTrader FAQ Social Groups Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-29-2011, 09:23 PM
Jim Bob's Avatar
Jim Bob Jim Bob is offline
Elite Member
  
Join Date: Jul 2007
Location: South Georgia
Posts: 3,000
Default 1912 Barber Dime
I went back to the spot I hunted Tuesday after doing a little work on my scoop. I added some 1/4 mesh to cover the holes and thus help catch the pesky little brass shells that are everywhere in this spot. I got 88 of them today. I hunted for 3 hours and was just about to go home skunked when I picked up this sweet 1912 dime. That just made my day. I also dug up that big copper or brass thing that looked like part of a trumpet at first but I have no Idea what it is. Also found what looks like part of a bracelet. After finding this Barber dime I have visions of more to come from this spot, I hope.
Attached Images
      

__________________
Whites XLT - Whites Surf PI Dual Field
Whites Beach Hunter ID-Whites V3i

Reply With Quote

  #2  
Old 04-29-2011, 09:25 PM
snf101480's Avatar
snf101480 snf101480 is offline
Elite Member
  
Join Date: Apr 2009
Posts: 3,552
Default
Nice going on the Barber, sometimes all you need is one coin to turn the hunt into a success!

__________________
ACE 250 & Excal II

Reply With Quote

  #3  
Old 04-29-2011, 09:28 PM
firstbigestmost's Avatar
firstbigestmost firstbigestmost is offline
Elite Member
  
Join Date: Aug 2009
Location: Sunny Florida
Posts: 1,085
Default
88! you're the man for holding steady! congrats

__________________
Tesoro Sand Shark PI, Excall II, Whites Classic II,
Sunspot Scoop. Rdwhahb!

Reply With Quote

  #4  
Old 04-29-2011, 09:29 PM
PricklyPete's Avatar
PricklyPete PricklyPete is offline
Full Member
  
Join Date: Dec 2008
Location: Northern Utah
Posts: 118
Default
Like the dime!

Question:

Does the brass piece qualify as a "Tootie" or a "Tooter"

I think the category is taken for "tootsie"


Pete

__________________
ACE 250, Garrett Pro-Pointer, CEN-TECH pinpointer and IPANA club charter member
The goal of every person should be to die young at the oldest age possible.

Reply With Quote

  #5  
Old 04-29-2011, 09:50 PM
Night Hawk's Avatar
Night Hawk Night Hawk is offline
Elite Member
  
Join Date: Jul 2006
Posts: 712
Default
Congrats Jim that dime is sweet

__________________
Minelab Excalibur II and a Excalibur 1000 a Minelab Quattro and a Tesoro Tejon

Reply With Quote

  #6  
Old 04-29-2011, 10:11 PM
Cfmct's Avatar
Cfmct Cfmct is online now
Administrator
  
Join Date: Jan 2006
Location: Connecticut
Posts: 17,734
Default
Wow Jim.. I thought I dug alot of bullets but you have me beat with the shell casings Good job on the Barber


Jim... I have 1/4 inch mess in mine bit I only have it half way up so the I can shake out the muck... you probably catch more small things than me though

__________________
Whites Dual Field PI
Sovereign GT
Connecticut

Reply With Quote

  #7  
Old 04-29-2011, 10:45 PM
boxing63's Avatar
boxing63 boxing63 is offline
Elite Member
  
Join Date: Feb 2011
Location: Pirate, Ct
Posts: 1,584
Default
Nice going on the Barber

__________________
EXCALIBUR ll, CTX 3030, Sovereign GT,AT PRO ID RATHER BE METAL DETECTING... Buy from New England Detectors U.S.A.

Reply With Quote

  #8  
Old 04-30-2011, 06:55 AM
Jim Bob's Avatar
Jim Bob Jim Bob is offline
Elite Member
  
Join Date: Jul 2007
Location: South Georgia
Posts: 3,000
Default mesh
Quote:
Originally Posted by Cfmct-PI View Post
Wow Jim.. I thought I dug alot of bullets but you have me beat with the shell casings Good job on the Barber


Jim... I have 1/4 inch mess in mine bit I only have it half way up so the I can shake out the muck... you probably catch more small things than me though
Craig, I usually only have the mesh in the bottom but the area I am hunting here is all sand and it filters through real nice. I'll have to take it out when I move to a spot that has muck. Good luck, Jim

__________________
Whites XLT - Whites Surf PI Dual Field
Whites Beach Hunter ID-Whites V3i

Reply With Quote

  #9  
Old 04-30-2011, 08:27 AM
jewaugh's Avatar
jewaugh jewaugh is offline
Elite Member
  
Join Date: Mar 2009
Location: Chesapeake, VA
Posts: 626
Default
Nice going on the Barber dime.
Not sure about the brass item.
Keep cleaning bullets out of the area and you might find some more older coins.

Jack in SE VA

__________________
Whites MXT, Fisher 1280-X, Troy Shadow X3, Fisher CZ-6

Reply With Quote

  #10  
Old 04-30-2011, 08:52 AM
Sonny b's Avatar
Sonny b Sonny b is offline
Elite Member
  
Join Date: Dec 2009
Location: Abilene Tx
Posts: 4,972
Default
Congrats on the old dime. The brass thing looks like it could be an old torch or something.

__________________
AT Pro W/stock coil, 2 Pro Pointers , Lesche, "A Bomb",
Ace 250 W/Excelerator coil, BH Pioneer 505 W/10" coil.

Reply With Quote

  #11  
Old 05-01-2011, 02:11 AM
wolf-n-wa's Avatar
wolf-n-wa wolf-n-wa is offline
Elite Member
  
Join Date: Oct 2008
Location: Tacoma&Tonasket, Wa.
Posts: 4,926
Default
Nice digs the bracelet thing is actually a watch band. WOLF

__________________
DIGGIN TO CHINA!
The Lost My Stuff Group --- http://www.lostmystuff.net/index.php

Reply With Quote

  #12  
Old 05-01-2011, 06:24 AM
wildman4910's Avatar
wildman4910 wildman4910 is offline
Full Member
  
Join Date: Jan 2011
Location: Cocoa, Fl
Posts: 227
Default
Sweet dime, the brass piece looks to me to be part of a gas lantern.
The lantern globes tie to the 2 short pieces.





~~Happy Hunting~~

__________________

Beeping...Why is it Beeping!~~Not Another Beer Can!!
Reply With Quote

  #13  
Old 05-01-2011, 08:09 AM
Jim Bob's Avatar
Jim Bob Jim Bob is offline
Elite Member
  
Join Date: Jul 2007
Location: South Georgia
Posts: 3,000
Default
Quote:
Originally Posted by wildman4910 View Post
Sweet dime, the brass piece looks to me to be part of a gas lantern.
The lantern globes tie to the 2 short pieces.





~~Happy Hunting~~
I think you may be right, I have just never seen any made out of brass

__________________
Whites XLT - Whites Surf PI Dual Field
Whites Beach Hunter ID-Whites V3i

Reply With Quote

Reply


« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ended 2012 with a 1912 Barber Quarter - SoCal Silver #140 Jamflicker Coinshooters and Relic Hunters 15 01-03-2013 03:09 PM
1912 barber dime joetoilet Coinshooters and Relic Hunters 3 05-22-2012 08:55 PM
1892 'O' Barber Dime - 1912 V Nickle - 1700's Buckle FooserPaul Stories and Pictures of Finds 7 09-08-2009 11:10 AM


All times are GMT -4. The time now is 07:29 AM.

Contact Us - Friendly Metal Detecting Forums - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.